Product Maintenance; Faults And Their Troubleshooting; Cleaning; Performance Parameters - CombiSteel 7455.0305 Gebrauchsanweisung

Product maintenance

Faults and their troubleshooting

Fault description
1 The machine does not work.
2 Loud work noise is produced.
3 The blade does not rotate.
4 The swing of the stirring cup is large.
The stirring cup has the problem of
5
water leakage.

Cleaning

1. Before cleaning, be sure to unplug the blender.
2. Wipe the body and cover of the blender with sponge or duster cloth and then reverse it for airing.
3. Warm water is recommended for its washing. Add some detergent to the water. Start the motor and after it
rotates for 5s to 10s, pour the water and then flush the stirring cup, cup cover, etc. thoroughly with clean
water. Reverse the blender and allow it to dry.
4. Never wash the blender by putting the hand into it.
5. Neutral detergent can be used to wipe the motor seat. Never use water to wash it. Then wipe it clean with
dry cloth.
6. Wash the seat and stirring cup separately.
7. Do not immerse the seat in water or put it in dishwashing machine to wash it.
8. Never clean the cutting tool in the blender with hand. Cleaning tools must be used to ensure safety.

Performance parameters

Model:
Product name:
Power:
Capacity:
Voltage/frequency:
Material:
Bearing:
Wire:
Total height:
Check the power switch to see if it is turned on.
1- Remove the stirring cup and reposition it.
2- Examine the pedestal to see if it is put on solid panel.
1- Examine the power supply to see if it is normal.
2- Examine the connector to if it fall off.
1- Remove the stirring cup and reposition it.
2- Shut down the machine and remove the stirring cup
1- Examine the screws at the bottom of the stirring cup to
2- Examine the seal ring to see if they fall off.
7455.0305
Professional blender
1500-2200W
64 Ounce/2.0L
220V – 50Hz
Copolyester environmental protection materials
High-precision spherical bearing
1.2m in length
466mm
www.combisteel.com
Troubleshooting
and see if there is any bulk matter in the cup.
see if they get loose.
7