Westfalia 87 47 85 Anleitung Seite 2

Art. 87 47 85
Using
Open the handle of the anvil lopper up to the end.
Cut the branch by closing the handle completely.
For adjusting the length of the handle, press down
the knob labelled with "Press". Keep the knob
pressed while pulling the handle to the desired
working length.
The handle has totally 6 latching positions.
Maintenance and Cleaning
Clean the anvil lopper after each use. Remove dirt
and leaves etc. from the blade in order to ensure
proper function. Oil all parts frequently.
For sharpening the blade you can use a hand
sharpening tool.
Clean the anvil lopper with a dry cloth. Do not use
aggressive cleaning agents or chemicals for
cleaning.
Storing
Protect the anvil lopper from influence of weather
like rain and store the anvil lopper in a dry location.
When storing, keep the anvil lopper with
completely closed blade.
Technical Data
Weight: 1560 g
Max. Cutting Capacity for fresh wood: 40 mm
Length: 68 up to max. 100 cm