Herunterladen Diese Seite drucken

Blaupunkt TMST-S1 Bedienungsanleitung Seite 3

Vorschau ausblenden Andere Handbücher für TMST-S1:

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Blaupunkt Smart Thermostat (TMST-S1)
Introduction
TMST is a battery powered Smart Thermostat. It is designed to be incorporated
into household heating and cooling systems for home environment control. The
Thermostat can be operated manually using the LCD screen and buttons and can
be accessed remotely via your Blaupunkt Q series.
Wiring of the Thermostat should be performed by a certified technician with
proper equipment to ensure safety. Please note that some heating systems
operate with 230V – danger of an electric shock. Disconnect the system
from power supply before starting installation by switching off the fuses or
main switch. Prevent the system from being switched on again. Wiring of the
Thermostat should be performed by a certified technician
with proper equipment to ensure safety.
Parts Identification
1. LCD Display
The LCD displays the following information:
A. ZigBee network connectivity icon
has joined ZigBee network and is within signal range.
B. The current mode will be displayed when the Up, Down or Mode button
is pressed.
Cool:
Heat:
Auto: Interval flash between
Fan:
C. Current time and weekday
D. Away mode icon
will be displayed when Thermostat is under Away
mode.
E. The temperature can be displayed in Celsius or Fahrenheit format.
2. Low Battery LED Indicator
The LED flashes when low battery voltage is detected
3. Test / ZigBee Network Button
-
Press the button once to:
Send a supervision signal with temperature and set point info.
-
Press and hold for 10 seconds then release to reset the Thermostat.
4. Down Button
Press the button to change set point.
5. Up Button
Press the button to change set point.
6. Mode Button
Press the button to change Thermostat mode.
7. Away Button
Press the button to change Thermostat to Away Mode.
8. Wall Mounting Holes
9. Back Cover Latch
Press both latches on the back cover to remove cover if needed.
10. Wiring Connection Terminals
Name
Description
Y
Cooling
W
Heating
G
Fan
OB
Reversing Valve
will be displayed when the Thermostat
and
Name
Description
RH
AC Power Input

Werbung

loading