Selecting The Operating Mode - Flex SPR 18.0 Anleitung

439.525_BT-Speaker.book Seite 17 Mittwoch, 13. Januar 2016 10:58 10
SPR 18.0

Selecting the operating mode

 Briefly press the
MODE
selecting the operating mode until the
desired mode is displayed.
The following operating modes are
available:
– Playback of music sources connected via
Bluetooth®
– Playback of music sources connected via
cable
AUX
– Radio reception
FM
– Radio reception
AM
The selection is shown by means of the
corresponding symbol on the left in the
display.
Playback of music sources
connected via Bluetooth®
 Set the operating mode
button for selecting the operating mode.
The symbol flashes.
 Activate the Bluetooth® function of the
device to be connected (mobile phone or
similar) and select "FLEX SPR 18.0" as
the target of the Bluetooth® connection.
For this purpose, follow the instructions
in the device operating manual (mobile
phone or similar).
NOTE
If a password is required, use "0000".
 When the connection is made, the
symbol lights up continuously.
 The playback of the data from the
button for
 To separate the Bluetooth® connection,
Playback of music sources
connected via cable
with the
MODE
 Set the
 To protect the device, push the external
 Release the AUX connector from the
 Switch on the external music source and
external source can be controlled via the
Bluetooth® speaker:
– Briefly press the Playback/Pause
button to start or interrupt the
playback (1.).
– Briefly press the ¶ or ·
to the previous or following track (2.).
– To increase the volume, press the
button.
VOL+
– To reduce the volume, press the
button.
VOL-
press the Playback/Pause
hold until the symbol flashes.
The connection is separated.
operating mode with the
AUX
button for selecting the operating
MODE
mode.
device under the elastic retaining
strap (1.).
holder and connect with the external
music source (MP3 player or similar) (2.).
start the playback.
button to jump
button and
17