Charging The Battery; Use; Switch Lighting On/Off; Set Brightness - ADE CM 1700 Bedienungsanleitung

Charging the battery

Charging the battery
A full charging process lasts for approx. 4 hours (depending on the
battery charge status). The battery powers the LED lighting for approx.
1.5 hours.
− Using the supplied USB connection cable, connect the USB port of the makeup
mirror with the USB port of a computer (PC, tablet, notebook) or a USB charger.
The indicator light next to the USB connection socket lights up red and the built-in
rechargeable battery starts charging.
Once the indicator light is off, the battery is fully charged and you can disconnect
the USB cable.

Use

− Place the mirror on a solid and vibration-free surface.
− The mirror can be tilted by 90° and offers 5-fold magnification.

Switch lighting on/off

− Tap the sensor button to switch the LED lighting on or off.

Set brightness

1. Tap the sensor button to switch the LED lighting on.
The LED lighting lights up with maximum brightness.
2. Press the sensor button for a bit longer to decrease the brightness.
3. Press the sensor button again for a bit longer to increase the brightness.
4. The lighting is switched off by short tapping on the sensor button.
14
Makeup mirror CM 1700