Asus Vintage V2-AH2 Schnellinstallationsanleitung Seite 4

Removing the side cover and
front panel assembly
1. Remove the cover screws on the rear panel.
2. Pull the side cover toward the rear panel until its hooks disengage
from the chassis tabs. Set the side cover aside.
3. Locate the front panel assembly hooks, then lift them until they
disengage from the chassis.
4. Swing the front panel assembly to the right, until the hinge-like tabs
on the right side of the assembly are exposed.
5. Remove the front panel assembly, then set aside.
Air duct Air duct
Chassis tab holes Chassis tab holes
Installing a CPU
1. Locate the CPU socket, then lift the socket lever to a 90º-100º angle.
2. Install the CPU to the socket, making sure that the CPU corner with
the gold triangle matches the socket corner with a small triangle.
3. Push down the socket lever to secure the CPU.
1
CAUTION: Incorrect installation of the CPU into the socket may bend the
pins and severely damage the CPU!
4
1
2
1
2
2
Quick installation guide Quick installation guide
4
4
3
4
3
4
3
4
3