Werbung
Verfügbare Sprachen
Verfügbare Sprachen
GB
• The accumulator must only be recharged with the charging device supplied by the manufac-
turer. Do not use any other charging devices in order to avoid damages.
• If the lamp is not used, the charging device must be removed from the socket.
• If possible, use the lamp in dry locations only. Under no circumstances use it continously in moist
or wet locations.
• For disposal, the lamp and the Nimh-accumulator must be handed over to the respec-
tive public recycling system.
Caution
Electrical energy can cause serious injuries. In order to avoid electrical shock, injuries or fi re the
following safety instructions have to be observed and respected:
• Ensure cable and housing are not damaged. Lights and charging stations that have fallen
down or that are damaged, must be checked by qualifi ed personnel before restarting operati-
on.
• When laying the power supply lead, ensure it does not come into contact with hot or sharp
parts and that it cannot be damaged in another way. The lead is to be laid in such a way that
it does not constitute a risk of stumbling.
• The charging station and work light must not be exposed to water or other liquids. Dangerous
voltage discharge may occur.
• Service and repair work should be carried out by qualifi ed technical personnel only. In order
ensure the working reliability in the long term, always use original spare parts.
• The charging station and/or the work light must not be disassembled. Inappropriate assembly
can lead to a reduction of the functionality, to fi re, to electrical shocks and/or to injury.
• Do not remove any safety devices.
• Never look directly into the light – the light intensity is strong enough to cause eye injuries.
• If an extension cord is necessary, it must be suffi ciently dimensioned for the charging station.
Cables which are not appropriate for the necessary amperage may overheat.
• When recharging, both the work light and the charging station slightly warm up which does not
reduce their functionality. When working with the work light, appropriate caution is required.
• Only use the work light within the prescribed places, and governed under the current regulati-
ons relating to the working environment and to electrical systems.
Warranty
Any claims against the manufacturer and/or its authorized agents because of damage caused
by improper use of the tool are void. Improper use of the tool is defi ned as:
• products which are altered, modifi ed or repaired by anyone other than Vigor-Equipment;
• subject to abuse, improper use, negligence,accordance with normal practices or the instruc-
tions and specifi cations of Vigor- Equipment;
• used in conjunction with any product, device, component or system, that is either defective,
the source of a defect, or not reasonably intended to be used in conjunction with this product.
Product Name:
LED-Light
Article No.:
VIGOR V1463 and ViGOR V 1812
We declare that the product which this declaration relates is in conformity with the requirement of the
standards of the EMC Directive (2004/108/EC) and the Low Voltage Directive (2006/95/EC).
Date: 17-06-2010
Hermann J. ZERVER
HAZET- WERK GmbH & CO.KG • Güldenwerther Bahnhofstr. 25-29 • 42857 Remscheid
info@vigor-equipment.com • www.vigor-equipment.com:
USA
Werbung
