Troubleshooting - AXXIV 15S10 Series Ausfuhrliche Benutzerhandbuch


Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission
devices aboard aircraft is
usually prohibited. Make
sure the wireless mod-
ules are OFF if you are
using the computer
aboard aircraft.
Use the key combina-
tions to toggle power to
the 3.75G/HSPA/WLAN/
Bluetooth modules, and
check the LED indicator/
visual indicator to see if
the modules are powered
on or not (see Table 2 on
page 7 and Table 3 on
page 8).
14

Troubleshooting

Problem
The Wireless LAN/
Bluetooth/3.75G/HSPA
modules cannot be detected.
The Bluetooth module is off
after resuming from Sleep.
The captured video files from
the PC Camera are taking up
too much disk space.
The computer is off (or in
Sleep Mode) but powered by
the AC/DC adapter plugged
in to a working outlet or
powered by the battery with a
capacity level above 20%. I
have plugged a device into
the powered USB port in
order to charge it, but the
device is not charging.
Possible Cause - Solution
The modules are off. Check the LED indicator
key indicator to see if the WLAN/Bluetooth/3.75G/HSPA module is
on or off (see Table 2 on page 7
LED indicator is off, then press the Fn + F11 (WLAN), Fn + F12
(Bluetooth) or Fn + (3.75G/HSPA) in order to enable the
modules (see Table 3 on page
The Bluetooth module's default state will be off after resuming
from the Sleep power-saving state. Use the key combination (Fn
+ F12) to power on the Bluetooth module after the computer
resumes from Sleep.
Note that capturing high resolution video files requires a
substantial amount of disk space for each file.
Note that the Windows system requires a minimum of 15GB of
free space on the C: drive system partition. It is recommended
that you save the capture video file to a location other than the
C:drive, limit the file size of the captured video or reduce video
resolution (Options > Video Capture Pin... > Output Size).
The port is not powered on. Toggle power to the port using the Fn
+ power button combination.
This function may not work with certain external USB compliant
devices (check your device's documentation). If this is the case,
power the computer on and connect the external USB device
in order to charge it.
and/or function
and Table 3 on page 8). If the
8).