Hardware Installation - V7 V7U3-IDESATA-BLK Bedienungsanleitung

System Requirements
Hardware
• USB 3.0 or 2.0 enabled PC or Mac
• Serial-ATA Harddrive, 3.5" IDE or 2.5" IDE Drive
Software
• Windows 2000, XP, Vista, Windows 7 or Mac OS X
Package Contents
• Installation Guide (this manual)
• The USB 3.0 to IDE or SATA Adapter
• Dual-mode Power Supply for Drives
• AC Power Cable
• SATA Data Cable

Hardware Installation

Step 1:
For 3.5" IDE drive
• Switch to "I" side.
• Connect the 4-pin molex power plug to the drive's power receptacle.
• Plug the drive directly to the 40-pin connector on the adapter (it is keyed, and
will only fit one way).