Product Overview - V7 UPS1DT750-1K Bedienungsanleitung

English
Installation & Operation
1. Inspection
The following items are inside the box: UPS Unit, User Manual
• Remove the UPS from its package and inspect it for damage that may have occurred during shipping. If any
damage is discovered, re-pack the unit and return it to the place of purchase.
2. Connect to Utility Power
• Connect AC power cord to utility power. Then, the UPS will start to charge inside battery. For best result,
charge the battery for 6 hours prior to initial use.
3. Plug in Equipment
• Battery back-up Outlets (3)
• Connect computer and monitor to the "Battery Backup" outlets. These outlets provide battery backup, EMI
filtering, line conditioning, and surge protection. Battery power is automatically provided in case of power
failure.
• Surge-Protected Outlets (3)
• Connect a printer, fax machine, or scanner to the "Surge-protected" outlets. These outlets do not provide
power during power failure.
CAUTION: NEVER connect a laser printer or scanner to the battery backup sockets of UPS. The equipment
may draw too much power and overload the UPS
4. Turn On/Off the UPS
•
To turn on the UPS unit, press the power switch lightly. Then, the LED or LCD will light up. To turn off the
UPS unit, press the power switch again. The display will shut off.
5. Install software (Optional for advanced users)
For optimal computer system protection, install UPS monitoring software to fully configure the UPS system.
Please follow steps below to download and install monitoring software.
1. Go to the website http://www.V7-world.com/downloads
2. Select ViewPower software for your operating system to download the software.
3. Follow the on-screen instructions to install the software.

Product Overview

1. Touch LCD display
2. Power Switch
3. AC input
4. Battery backup outlets
5. Surge-protected outlets
6. USB port
7. RJ11/RJ45 in/out
3
1
7
5
4
6
2