Fault Detection - Pressalit Care 410 Gebrauchs- Und Pflegeanleitung

6

Fault Detection

Fault
Shower chair runs
unevenly/sticks on
horizontal track.
Shower chair cannot be
folded up or down.
Shower chair does not
work, even when remote
control used correctly.
Electrical shower chair runs
slowly.
Shower chair cannot be
adjusted even when lever
lock used correctly.
Contact Pressalit Care or the dealer if the fault cannot be
corrected. Do not attempt to repair the product. Doing so may
invalidate the guarantee..
CE
The CE mark indicates that this product has been
manufactured in accordance with Directive 2007/47/
EC of 5 September 2007 on medical devices and
subsequent amendments.
Information on disposal and recycling
Electrical and electronic equipment (EEE) contain materials,
components and substances which can be dangerous and
hazardous to human health and the environment, when the
waste of electrical and electronic equipment (WEEE) is not
disposed of correctly.
Waste of electrical and electronic equipment must not be
disposed of along with unsorted domestic refuse, but must be
collected separately.
Cause
Lock activated.
Lime deposits and dirt.
Fault in electricity supply
Lubrication required.
Lubrication required.
Correction
Check if lock is activated.
Remove lime spots (see
under Cleaning).
Check wall track for dirt and
lubricate with silicon.
Check all wires and plugs
are intact.
Check transport protection
is removed.
Contact an authorised
electrician for further checks
if necessary.
Remove end stop and front
panel; apply lubricant using
a brush and move slide up
and down until lubricant is
evenly distributed.
Lubricate lever lock.