Peiying PY-GPS7011 Bedienungsanleitung Seite 28

Owner's manual
9.4 Sound Setting
A. Select "Sound" to access sound setting.
B. Tap the bar to adjust sound volume of speaker. Enable or
disable the touch tone. Select startup sound
C. Tap to confirm the change and exit.
9.5 Time & Date
Select "Time" to set up date and time of the device. You may
adjust year, month, day, hour and minute (24 hours format). Tap
to confirm and exit. Select correct time zone as Time & Date
can be updated automatically while receiving GPS signal from the
satellites.
9.6 System Info
Select "System" to view system information, such as SDRAM,
Flash, Store memory, Version and SN (Serial Number).
9.7 Touch Pen Accuracy Calibration
Select "Co. adjust" to adjust accuracy of touch pen, follow the
instruction to touch the center of the cross with the stylus pen.
9.8 Update Logo
The function is for updating start-up logo of the device. Please be
sure you have stored the Logo pictures in the SD card.
9.9 GPS Path
Select "GPS Path" to setup GPS Map and software path for
navigation. Copy the files to the internal flash memory or put
them on the SD card. Select the path and folder to find the map
executive software (.exe) used, tap the file and tap "GPS Path",
check it and confirm.
EN
9.10 USB
Select "USB" to select different mode while device is being
connected to PC: Mass Storage or ActiveSync. The default
setting is Mass Storage.
28