Fm Radio - auna 10031947 Bedienungsanleitung

EN
18

FM RADIO

Tuning the FM Radio
1 Press the Power button to turn on the unit.
2 Extend and position the FM antenna for better reception.
3 Press the SOURCE button repeatedly to select FM band. The FM
indicator and frequency will appear on the LCD display.
4 Press and hold the SKIP/TUNE (up) button or SKIP/TUNE (down) button
to search the next/previous available station.
5 If reception is poor, try manual tuning to fine-tune the station. Briefly
press the SKIP/TUNE (up) button or SKIP/TUNE (down) button to
manually tune the frequency.
6 Adjust the Volume + / Volume – to set the desired volume.
Setting Radio Station Presets
This unit can store up to 20 stations for easy recall at any time
1 Press Power button to turn on the unit.
2 Press the SOURCE button repeatedly to select FM band. The FM
indicator and frequency will appear on the LCD display.
3 Press and hold the SKIP/TUNE (up) button or SKIP/TUNE (down) button
to select the desired station.
4 Press the CLK. SET / P-MODE / MEMORY button to activate the
program function. The program number "P01" will appear on the LCD
display and blink.
5 Press the SKIP/TUNE (up) button or SKIP/TUNE (down) button to select
the desired program number.
6 Press the CLK. SET / P-MODE / MEMORY button to confirm.
7 Repeat steps #3 and #6 above to set up to 20 station presets.
8 To recall an existing preset station, repeatedly press the Folder+ / M+ /
10+ button or Folder- / M- / 10- button.