All Functions In Detail; Pairing The E-Motion Wheels - Alber E-MOTION ECS Gebrauchsanweisung

ALL FUNCTIONS IN DETAIL

1. Pairing the e-motion wheels

- Switch on both e-motion wheels using the on/off button of the
respective wheel.
- Switch on the ECS remote control via the on/off button [1].
- If the ECS remote control has never been connected to e-motion
wheels before, the link symbol
- The Bluetooth symbol
remote control [2].
- If you want to connect a new e-motion wheel pair with the ECS
remote control, switch on the ECS remote control and press the
pairing button [5] on the back of the ECS remote control for at least
3 seconds with a narrow but not pointed object (e.g., ballpoint pen).
The link symbol X
- As soon as an e-motion wheel has been found by the ECS remote
control, the LED display of the wheel flashes and an acoustic signal
can be heard.
flashes in the LCD [2].
also flashes in the LCD of the ECS
now also appears in the LCD [2].
35