Charging
When PMD-901V's battery life is low, the battery (
display, and you will hear an alert tone. When this happens, charge PMD-901V.
To charge PMD-901V, do either of the following:
A. Use a standard mini-USB cable to connect PMD-901V's USB port to one
of the following:
•
a USB port on your computer (powered on)
•
the included USB power adapter (connected to a power outlet)
•
the included car charger (connected to the cigarette lighter of a car,
while running)
B. Attach PMD-901V to the charging base (make sure PMD-901V's display is
facing the same direction as the charging base's USB port). Use a standard
mini-USB cable to connect the charging base to one of the following:
•
a USB port on your computer (powered on)
•
the included USB power adapter (connected to a power outlet)
•
the included car charger (connected to the cigarette lighter of a car,
while running)
Alternatively, use a power adapter (5 V, 1 A, center-positive, 2.5 mm barrel
diameter, sold separately) to connect the charging base to a power outlet.
If PMD-901 is in CarDV Mode, when you remove PMD-901V from the charging
base, it will power off automatically. See the User Guide to learn more about this.
) icon will flash in the
11