Camera Operation - HP f150 Quickstart-Anleitung

Camera Operation

Modes of operation
The camera has three modes:
Mode button
NOTE: Pressing the
Video
The initial power up will put the camcorder in
Mode button
the
- Press
Photos
Mode button
Press
Record button
-Press
Streaming modes
Direct Streaming
Connect the camcorder wirelessly to your laptop/PC, smartphone or table.
1) Press and hold the power button until an audible beep sounds and the
icons are illuminated on the rear of the camcorder.
2) The camcorder is now in Video Direct mode and ready to connect to a wireless notebook/PC, Smart phone or
tablet.
application.
3) Open the PC APP or HP Ucam application and follow the connection steps:
Select
Camcorder
Cloud Streaming
Connect the camcorder to a Cloud server (Ustream) via an access point (AP) or mobile Hotspot for
Internet live video and monitoring.
http://www.ustream.tv/
For additional information and a full version of the User Manual visit the
videos which explain the f150 in greater detail.
Video in Direct Streaming mode
Cloud Streaming
.
switches between camera modes (Video, Photo) and Streaming modes (Direct, Cloud)
until desired mode is selected.
Record button
to capture video, press again to stop
Photo Direct mode
to select
to take pictures.
Please wait for the Direct Mode LED
Control or Setup
or
Hot
Wireless
Spot
Router
Photo in Direct Streaming mode
,
Video Direct
mode. If not in Video Direct mode, press
.
Video Mode
to stop flashing before opening the PC/Android/iOS
USTREAM
Cloud Server
www.hp.com/support
2
, and
Direct Mode
and
or search YouTube™ for