Aigostar 8433325504250 Bedienungsanleitung Seite 3

GB
19.
Correct Disposal of this product
This marking indicates that this product should not
be disposed with other household wastes
throughout the EU. To prevent possible harm to the
environment or human health from uncontrolled
waste disposal, recycle it responsibly to promote
the sustainable reuse of material resources. To
return your used device, please use the return and
collection systems or contact the retailer where the
product was purchased. They can take this product
for environmental safe recycling.
20. This heater is filled with a precise quantity of special oil.
Repairs requiring opening of oil-container are only to be made
by the manufacturer or his service agent who should be
contacted if there is an oil leak. When scrapping the heater,
follow the regulations concerning the disposal of oil.
21. Children of less than 3 years should be kept away unless
continuously supervised. Children aged from 3 years and less
than 8 years shall only switch on/off the appliance provided that
it has been placed or installed in its intended normal operating
position and they have been given supervision or instruction
concerning use of the appliance in a safe way and understand
the hazards involved. Children aged from 3 years and less than
8 years shall not plug in, regulate and clean the appliance
or perform user maintenance.
22. CAUTION — Some parts of this product can become
very hot and cause burns. Particular attention has to be
given where children and vulnerable people are present.
GB-03
WARNING: IN ORDER TO AVOID OVERHEATING,
DO NOT COVER THE HEATER.
PART FIGURE
Fan switch
Air Outlet
Radiating unit
Caster assembly
ASSEMBLY INSTRUCTIONS
Unpack your heater and find the wheel-holding plate and butterfly nuts
assemblies.assemblies.assemblies.
1. Make sure the heater is unplugged and in the "OFF"
position.
2. TURN THE HEATER UPSIDE DOWN.
3. Attach the wheel-holding plates onto the heater as Fig.1
Shows The U plate is fixed between the last tow fins and
the other one is fixed under metal control box.
Fix the castors to the vertical axis of both the wheel
holding plates.
4. Insert the butterfly nuts and tighten them securely.
5. TURN THE HEATER UPRIGHT.
Your heater is now ready to use.
GB
Air Outlet
Power
Indicator Light
Termostat Knob
Power
Switch Knob
Air Inlet
Air Outlet
Cord wrap
between the fins
Fig.1
GB-04