Dvd-Player - Panasonic TY-FB9BD Bedienungsanleitung

Connection
Back view of the display
Applicable input signals and correspondent colour system setting list
Horizontal
Signal name
frequency(kHz)
NTSC 15.734
PAL 15.625
PAL60 15.734
PAL-M 15.734
PAL-N 15.625
SECAM 15.625
M.NTSC 15.734
Notes:
• Additional equipment and cables shown are not supplied with this set.
• This terminal board has two pairs of inputs thus "-A" or "-B" is added at the end of each Input label to distinguish
between those inputs. "-A" is added for the input which includes the BNC connector, "-B" is added for the input
which includes the S-Video terminal.
i.e.) INPUT1A, INPUT1B
• "-A" and "-B" will be displayed alternately when press the DIRECT INPUT button on the display's remote control.
i.e.) INPUT1A INPUT1B
Slot 1)
• All inputs will be changed in rotation when press the INPUT button on the remote control.
i.e.) INPUT1 INPUT2A
(When press the INPUT button with installing the terminal board in Slot 2)
• "-A" or "-B" will be added at the end of the selected label if Input label is chosen to be displayed.
i.e.) DVD2B (When the terminal board is installed in Slot 2, the S-Video terminal is connected and DVD is chosen
as a label)
• Common setting is made for "-A" and "-B" about Picture, Sound, all Set up menus and ASPECT. (Setting can be
separately made if set the "Colour system" "Auto".)
• This terminal board can memorize one Pos. /Size setting for each of the Vertical Frequency reception; one is 50Hz
and the other is 60 Hz.
• No Panasonic Auto is available.
• Input A and B cannot be displayed together.
• S-VIDEO and Composite inputs can be used separately.
SLOT1
DVD PLAYER
Colour System Setting on On Screen Display
Vertical
AUTO
frequency(Hz)
59.94
50.00
59.94
59.94
50.00
50.00
59.94
INPUT1A - - - (When press the INPUT 1 button with installing the terminal board in
INPUT2B INPUT3 PC
SLOT2
R L R L VIDEO
S VIDEO
AUDIO OUT AUDIO OUT OUT
OUT
Digital TV-Set-Top-Box (DTV-STB)
NTSC PAL SECAM
INPUT1 - - -
PC IN
SLOT3
SLOT3
M.NTSC
7