Belüftung um den Umschalter Ÿ Legen Sie keine schweren Gegenstände auf das Gerät 2. Installation 1. Schließen Sie das Stromkabel an der Rückseite des TEG-S80Dg an und stecken Sie es in eine Steckdose. 2. Schalten Sie den Netzschalter auf die “ON” Position.
Seite 3
3. Verbinden Sie den Computer über ein KAT.5e oder KAT. 6 RJ-45- Netzwerkkabel mit einem freien Ethernet-Port des TEG-S80Dg. 2. LEDs Stromversorgung Ÿ Grün: Gerät wird mit Strom versorgt Ÿ Dunkel: Gerät ist ausgeschaltet Link/Aktivität Ÿ Grün (leuchtet): Mit anderem Gerät verbunden Ÿ...
Technical Specifications Hardware Ÿ IEEE 802.3 10BASE-T Standards Ÿ IEEE 802.3u 100BASE-TX Ÿ IEEE 802.3ab 1000Base-T Ÿ IEEE 802.3x Flow Control Ÿ Ethernet: Cat. 3,4,5, up to 100m Network Media Ÿ Fast Ethernet: Cat. 5, up to 100m Ÿ Gigabit Ethernet: Cat. 5, 5e,6, up to 100m Ÿ...
Troubleshooting 1. After connecting the Switch to a power outlet, the LEDs do not turn on. Check the connection of the power adapter to the TEG-S80Dg and the power outlet. 2. Verify that the power switch is set to the On position.
Seite 6
If a product does not operate as warranted during the applicable warranty period, TRENDnet shall reserve the right, at its expense, to repair or replace the defective product or part and deliver an equivalent product or part to the customer. The repair/replacement unit's warranty continues from the original date of purchase.
Seite 7
License ("LGPL"). Go to http://www.trendnet.com/gpl or http://www.trendnet.com Download section and look for the desired TRENDnet product to access to the GPL Code or LGPL Code. These codes are distributed WITHOUT WARRANTY and are subject to the copyrights of the developers.