Epson B867091 Handbuch Seite 4

Unplug your equipment from the wall outlet and refer servicing to qualified
personnel under the following conditions:
If the power cord or plug is damaged; if liquid has entered your equipment;
if your equipment has been exposed to rain or water; if your equipment has
been dropped or damaged; if your equipment is operating abnormally or
exhibits a distinct change in performance. Adjust only those controls
described in your product documentation.
Never attempt to repair this product yourself. Improper repair work can be
dangerous.
Unplug this product from the wall outlet before cleaning.
Clean only with a clean, soft dry cloth.
Do not use liquid or aerosol cleaners.
Keep out of reach of children.
For US and Canadian users (B867081 only)
Use the included power cord or a 6 to 10 feet long UL-approved type NISPT-
2, 2 x 18 AWG cord with a 125 V 10 A polarized plug and 125V 7A connector.
The AC Adapter is equipped with a polarized alternating-current line plug
(a plug having one blade wider than the other) and polarized power inlet.
These plugs only fit into a power outlet and your equipment in one way.
This is a safety feature. If you are unable to insert the plug properly, try
reversing the plug. If the plug still fails to fit, contact an electrician to replace
your outlet. Be sure to use only the polarized AC cord that comes with the
AC Adapter.
If you plan to use the camera and options in Germany, observe the following:
To provide adequate short-circuit protection and over-current protection for
these products, the building installation must be protected by a 16 Amp
circuit breaker.
Note:
This product is designed for use with EPSON products ONLY. Do not attempt to use it
with other electronic devices.
English