Werbung
ENGLISH
Installation
• Make sure the shredder head is mounted securely onto the waste bin. See illustration 1-2-3
• Connect the electricity plug to any standard power socket
Operation
The switch on your Swordfi sh shredder enables you to select one of the followings settings:
• auto - with this setting the shredder is automatically started by inserting paper into the feed slot. With the
electrical cord plugged in, the slide switch in the auto position and the shredder wastebasket properly in place,
the ready LED will light up
• rev - in the unlikely event of paper jam, the reverse setting can be used to help clear the cutters of paper that
has not passed through properly
• off - this setting turns off all functions of the shredder
Capacity
This Swordfi sh shredder will shred:
• up to 10 sheets of 80gsm paper with a max width of 220mm
• credit cards through the credit card slot in the middle of the paper feed opening
Continuous shredding should not last more than 3 minutes, after which the shredder should be allowed to
cool down for 20 minutes before continuing. If the shredder is used continuously for more than 3 minutes, the
shredder will automatically switch itself off . After an auto power off , put the switch into the off position for 50
minutes before turning the shredder back on.
In case of a minor paper jam:
The overload LED will light up. Grasp the excess paper from the top and pull it out as you press the reverse
button.
In case of a major paper jam:
The shredder will automatically switch itself off . After an auto power off , put the switch into the off position for 50
minutes before turning the shredder back on. Grasp the excess paper from the top and pull it out as you press the
reverse button.
Warning
• Do not place fi ngers too close to the feed slot as serious injury may occur
• Always disconnect the power plug before cleaning a Swordfi sh shredder
• Repairs must be carried out by a specialist. There are no user-serviceable parts inside a Swordfi sh shredder
• Keep the waste bin emptied so that the shredder output is not impeded
• Swordfi sh shredders should only be used within the defi ned capacity
• Keep all loose articles of clothing, ties, jewellery, long hair or other loose objects away from opening
• Keep children away from the machine. This shredder is not a toy
• Do not pass paper clips or soft plastics through the shredder
• Shredders should be oiled on a regular basis and before any period of intensive shredding
• Lubrication should always be done when the shredder is cold. Never add oil to a hot shredder
6
www.snopakebrands.com
Operating Instructions
Werbung
