Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Heritage A200 Integrated Amplifier
Discovering your A200: Front view
1
ON/OFF switch: Use this button to switch ON or switch OFF your
1
2
Input selector: Selects between the nine different inputs.
2
DISPLAY and IR sensor: All information relating to the operation of your A200 appears here.
3
Point the remote control to this zone to control your A200 from a distance.
4
Volume control: To adjust volume, set to zero upon installation.
0
1
2
3
2
4
5
6
Page 6
2
Using your YBA remote control
Point your remote control to the IR receiver located in the display
window of your A200.
Select the device you want to control between AMP, CD and AUX. To
0
control the A200, you need to select AMP button.
Note: AMP will remain the active function until you select another
device.
SOURCE+/SOURCE-: Press SOURCE+/SOURCE- to skip to the desired
1
VOLUME+/VOLUME-: Press + to increase volume, or - to decrease the
2
output volume of the amplifier. This is a universal control and does not
require specific source selection.
3
VIEW: Press to dim/brighten the display.
4
FCT: Hold to store current volume level.
5
AUDIO: Press to resume to the stored volume level.
6
MUTE: Press to mute. Press again to exit mute.
Note:
PRESS means a short press on a key while HOLD means to keep the key
pressed for more than 3 seconds.
www.ybahifi.com
3
4
Werbung
