Operation - Westfalia H-031 Bedienungsanleitung

Remove all packaging from the heating cushion and refuse the
packaging or store it in a safe place out of reach of children.
There is danger of suffocation!

Operation

1. Place the heating cushion on the car seat and fasten it with the
elastic straps and included hooks.
2. Connect the power cable to the cigarette lighter socket of your
car. Make sure the on-board voltage is 12 V. A lighting LED on
the plug shows that voltage is on and the adapter fuse is
working.
3. The heating cushion is equipped with two heating levels. Turn
the switch to "HI" to operate the cushion on a high heating level
and to "LO" to choose lower heating. By switching "OFF" the
heating cushion goes out.
Hints:
 The inside thermostat will cut off the heating process at a
temperature of 65° C ± 5° C. Heating will start again if the
temperature reaches 45° C ± 5° C.
 If the seat and the backrest of the heating cushion do not
become warm after a short time, check the fuse in the
cigarette lighter and the fuse in the power plug of the unit. If
damaged, replace with a fuse of the same type and
dimensions.
Operation
9