Start-Up; Connection To A Tv Set Or Monitor; Reset Button; Volume Control - Kamikaze Gear Micro Game Power 25in1 Bedienungsanleitung

6. Start-up

1. Start the Micro Game Power 25in1 video game console by pressing
the power button once.
2. Next, press the action button
3. Select the desired game by pressing the digital directional pad.
4. To start the game, confi rm your selection by pressing the
action button .
5. Press the reset button to return to the main menu during the game.
6. To switch off the Micro Game Power 25in1 video game console, press the
power button for three seconds. Releasing the button will switch off
the device.

6.1 Connection to a TV set or monitor

1. Make sure that the Micro Game Power 25in1 video game console and
your TV set or monitor are switched off.
2. Only connect the included A/V cable to the corresponding A/V plug on
the Micro Game Power 25in1 video game console.
3. Next, connect the two cinch connectors (yellow/white) with your TV
set or monitor.
4. Start your Micro Game Power 25in1 video game console and your TV
set or monitor.
5. Select the proper TV channel on your TV set.
6. For all steps, please note the instruction manual provided by the
manufacturer of your TV set or monitor.
28
to enter the main menu.

6.2 Reset button

Pressing the reset button at any time will bring you back to the main
menu. In case of a game malfunction, you can press the reset button
to open the main menu again.

6.3 Volume control

This button adjusts the volume of the
speaker or headphones, if the latter
is connected.
When a headphone is connected, the
Micro Game Power 25in1 video game
console will switch off the speaker.
29