Werbung
Verfügbare Sprachen
Verfügbare Sprachen
4 English
6. SERVICING
Under normal pumping conditions the pump requires no servicing. From an operating period (with clear
water) of approx. 2000 hours the mechanical components should be checked: impeller wheels, chambers,
sealing rings etc. on wear and if necessary be changed. After 3000 pumping hours the oil in the chamber
should also be changed, if necessary (only with oil-dipped engine types!). Please, only fill it up to 80% and
check the sealing rings always for density.
With abrasive materials like sand the servicing duration can become shorter.
The following controls should be carried out regularly:
l Intactness of the electric cable
l That the connection hoses are not bent or broken
l Cleanness of the pump medium
Moreover, the pump should be emptied with risk of frost, be washed out with clear water and stored dry.
7. GUARANTEE REGULATIONS
For all manufacturing and material defects, the statutory warranty applies. In these cases we take the replacement
or repair of the pump. Shipping costs shall be borne by our company, except as required by law. Please report the
warranty on our service platform http://www.profi-pumpe.de/service.php. We will inform you how to proceed with
case-related. Returns please sufficient postage. Unfortunately not prepaid returns can not be accepted because they
are filtered out before delivery. Our service we provide in Germany.
The warranty does not cover:
l Improper installation (self-installation, unauthorized persons)
l Material wear (sealing rings, impeller wheels, impeller chambers)
l Unjustified interventions or changes in the pump
l Damages by selffault
l Improper servicing and improper use
l DRY RUNNIG (Also partially!) of the pump
Moreover, we give no damage compensation for secondary damages!
8. RECOGNISING AND REPAIRING OF MISTAkES
Problem
Possible cause
Pump runs, no water is being
Air in the system (cannot escape)
pumped
Impeller wheel is blocked
Pump does not start or switches
Engine guard has switched the
itself off
pump off
No electricity
Pump runs, Pump capacity slows
Pump is inserted to deep
down or stops
Hose connections systems have
a leak
Impeller wheel is worn down
Filter has become dirty
9. NOTES ON PRODUCT LIABILITy
We point out, that we are only liable for damages under the Product Liability Act, which are caused by our units if
no changes were made to the equipment. If repairs are carried out by our authorized service, we are only liable if
original spare parts and accessories were used.
10. NOTES ON DISPOSAL
Electro devices of our company, labeled with the symbol of the crossed trash bin, are not permitted to
be disposed in your household garbage. We are registered at the German registration department EAR
under the WEEE-No. DE25523173. This symbol means, that you're not allowed to treat this product as
a regular household waste item – it has to be disposed at a recycling collection point of electrical de-
vices. This is the best way to save and protect our earth.
ThANk yOU FOR yOUR SUPPORT!
Solution
Air in the system must be let out
Impeller wheel must be cleaned
Pump needs to be cooled
Check electrical connections
Insert pump not so deep
Check hose connection systems
Change impeller wheel
Clean filter
11. EU DECLARATION OF CONFORMITy
The products listed overleaf accordance with the marketed in accordance with the relevant provisions listed below, the
relevant EU directives and harmonized with EU standards for safety. This declaration is valid insofar on the product,
no changes are made.
Authorized person to keep the technical documents:
1A-Profi-Handels GmbH · Unterriethstraße 37 · D-65187 Wiesbaden
Low Voltage Directive (2014/35/EU)
Machinery Directive (2006/42/EC)
EC Electromagnetic compatibility directive (2014/30/EU)
The following harmonized standards:
EN ISO 12100:2010, EN 809:1998+A1:2009+AC:2010, EN 60204-1:2006+A1:2009+AC:2010,
EN 60335-1:2012+A11:2014+AC:2014, EN 62233:2008+AC:2008,
EN 60335-2-41:2003+A1:2004+A2:2010, EN 60034-1:2010+AC:2010,
EN 55014-1:2006+A1:2009+A2:2011, EN 5514-2:2015, EN 61000-3-2:2014,EN 61000-3-3:2013
Wiesbaden, 1st October 2017
ppa. Peter Neumüller
English 5
Werbung
