Resi -UI-4L-RD Handbuch Seite 2

RESI-UI-4L-RD
RESI Informatik & Automation GmbH, Altenmarkt 29, A-8551 Wies, Austria, Tel: +43-316-262062-0, Fax: +43-316-262062-66, Email: help@RESI.cc URL: www.RESI.cc
IMPORTANT: Before you start with the installation of the product, read the attached IMPORTANT SECURITY NOTES very carefully and follow all the herein given information very accurate!
Description:
Signal module with 4 build-in LEDs (24Vdc, max. 20mA) in RED to show the state or errors of machines. Each LED is wired via a removable 2 pin terminal block. 4 internally bridged 2 pin terminal blocks to distribute
the power supply (max. 60Vdc, max. 4A). Module suitable to build up a DIN ISO 16484 and VDI 3814 compatible manual operator interface, Weight: 150g, Dimension (LxWxH): 72x110x62mm, Snap able onto a
EN50022 DIN rail or wall mounting.
Manual:
Read the actual manual for our product very carefully! You will find the manual on our homepage
M- M- M- M-
L+ L+ L+ L+
4x
24Vdc, max. 20mA
A B C D
1 2 1 2 1 2 1 2
www.RESI.cc
CLAMPS
Power supply
L+
M-
LEDA
CLAMP A
1
2
LEDB
CLAMP B
1
2
LEDC
CLAMP C
1
2
LEDD
CLAMP D
1
2
Technical Data
Contact rating
L+, M- terminals
Voltage
Current
Type of terminal block
All L+ are internally bridged together
All M- are internally bridged together
LED Clamps A, B, C, D
Number of LEDs
A K
LED color
LED Voltage
Strom pro LED
Power consumption per
1 2
LED
Clamps
Clamps
Clamp wire cross section
Tightening torque
EN
RESI-UI-4L-RD
Bridged group of clamps to supply other modules with the input supply
L+: All pins marked L+ are internally combined (bridged) Supply 0..60Vdc
M-: All pins marked M- are internally combined (bridged) Ground of the supply
Terminal block for LED A:
1: +24Vdc pin for LED (Anode)
2: GND pin for LED (Cathode)
A K
1 2
Terminal block for LED B:
1: +24Vdc pin for LED (Anode)
2: GND pin for LED (Cathode)
Terminal block for LED C:
1: +24Vdc pin for LED (Anode)
2: GND pin for LED (Cathode)
Terminal block for LED D:
1: +24Vdc pin for LED (Anode)
2: GND pin for LED (Cathode)
Storage temperature
max 60Vdc Operating
Temperature
max 4A Protection Class
4xremoveable 2pin Humidity
terminal block in black
Dimensions LxWxH
Weight
Mounting
4
RED
24Vdc
max 20mA
<0.5W
For each LED 1
removable 2pin terminal
block in black
max 1,5 mm²
max 0.5Nm CE conformity
-20...80 °C
0...60°C
IP20 (EN 60529)
25...90 % rH non-
condensing
72mm x 110mm x 62mm
140g
On DIN EN50022 rail or
wall mounting
Yes