Herunterladen Diese Seite drucken

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

00137431
Device Overview
Reversible Wristband
How to wear your Q-Band HR+?
1
Wear Q-Band HR+ on your wrist
Put on the wristband with the screen facing up
and the band wrapped around your wrist. Slide
one band through the loop of the other band, and
align the clasp along the band to find the holes
where best fit the clasps.
Video Demo:
http://ww2.voiis.com/igotu-life/wear/Q-Band-HR-Plus
4
Charge your Q-Band HR+
1
To charge your Q-Band HR+, place it in the charging box at the other end
of the USB cable. Close the box afterwards, and make sure the Q-Band
HR+ is securely covered. Plug the USB connector to either a PC or power
adapter to start charging.
Important Notice:
The product is shipped with the screen and keys locked, and will be unlocked once it is
charged via USB connection. Please make sure the "Charging" icon appears while it is
being charged, indicating the device is connected correctly and getting charged.
Touch Button
Optical Sensor
2
Fasten Q-Band HR+ with clasp
Video Demo
Squeeze both clasps into the holes on the wristband
until you hear a click, indicating the band is securely
fastened.
Note: The wristbands are both replaceable and
reversible.
2
3
Charging icon
Core
Metallic contact for charging
1.
2.
5
Change the wristband
1
2
1.
Remove the wristbands by sliding out both bands from the slots on both sides
of the core.
2.
Insert the new bands into the slots on both sides of the core.
Important Notice:
Failure to follow the instructions above might cause damage to the device.
User Manual
Q-68HR
3
Detecting your Heart Rate
Please make sure the wristband is worn as tightly as
possible on the wrist without any discomfort, in order
to enhance the accuracy of heart rate signals that
are detected.
Wear the wristband three fingers away from your
wrist. When "-----" text appears on the screen,
please stay still briefly for about 10 seconds to obtain
a heart rate reading.
EN
Clasp

Werbung

loading

Inhaltszusammenfassung für Hama Q-68HR

  • Seite 1 User Manual 00137431 Q-68HR Device Overview Reversible Wristband Clasp Touch Button Core Metallic contact for charging Optical Sensor How to wear your Q-Band HR+? Wear Q-Band HR+ on your wrist Fasten Q-Band HR+ with clasp Detecting your Heart Rate Video Demo...
  • Seite 2 Please do not use any corrosive chemical to clean the device. Hereby, Hama GmbH & Co KG declares that the radio equipment type [00137431] is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is The built-in Li-Polymer Battery might be damaged if it remains low available at the following internet address: www.hama.com ->...
  • Seite 3 00137431 Q-68HR Bedienungsanleitung Geräteübersicht Umkehrbares Armband Verschluss Sensortaste Kern Metallkontakt zum Aufladen Optischer Sensor Wie tragen Sie Ihr Q-Band HR+? Q-Band HR+ an Ihrem Q-Band HR+ mit Ihre Herzfrequenz erkennen Handgelenk tragen Verschluss befestigen Videodemo Legen Sie das Armband mit der Bildschirmseite nach Stecken Sie beide Haken in die Löcher am Armband,...
  • Seite 4 Konformitätserklärung Bitte reinigen Sie das Gerät nicht mit ätzenden Chemikalien. Hiermit erklärt die Hama GmbH & Co KG, dass der Funkanlagentyp [00137431] der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der Der integrierte Lithium-Polymer-Akku kann beschädigt werden, falls er folgenden Internetadresse verfügbar: www.hama.com ->...