Owner's manual
Micro SD Card
There is micro SD card slot on the device, please insert micro SD
card in correct direction, push in gently and release after hearing
a click sound. The micro SD card can be removed by pushing it
again and release after a click sound.
Caution
1. Make sure the micro SD card is inserted in correct direction.
2. Make sure the device is power off before inserting or removing
memory card.
3. Do not remove the card while it is operating (loading, copying),
or the card or the files might be damaged
4. Keep the card away from any liquid and chemicals.
Battery and Recharging
1. Power Sources
The power sources of this device are a built-in rechargeable
battery and a USB charger, ex. car charger or adapter (optional).
If a charger is connected to the device, the built-in rechargeable
battery will be recharged automatically. Whenever the device is
not connected to a charger, it can work with the built-in battery till
out of power.
Caution:
1. The battery of a new device might be very low or empty, please
recharge the device up to 8 hours for the first time to achieve the
best performance of battery. (but not over 16 hours)
2. Battery life and recharge cycles vary depends on temperature
and your usage.
3. Do not remove, collide, puncture and discard the battery into
fire.
EN
20