1 Zu dieser Anleitung Gültigkeit, Aufbewahrung und Weitergabe der Anleitung Diese Anleitung gilt für den Alpha IP Temperatur- und Luftfeuchtigkeits- sensor– innen (STH 61001-xx). Sie enthält Informationen, die für die Inbetriebnahme und Bedienung notwendig sind. Bevor mit dem Gerät gearbeitet wird, ist diese Anleitung vollständig und gründlich zu lesen.
Sicherheit 2 Sicherheit Bestimmungsgemäße Verwendung Der Alpha IP Temperatur- und Luftfeuchtigkeitssensor – innen (STH 61001- xx) ist eine Systemkomponente des Alpha IP Systems und dient • der ortsfesten Installation in wohnungsähnlichen Umgebungen, • der Messung von Temperatur und Feuchtigkeit im Raum, •...
Alpha IP STH 61001-xx Sicherheit Konformität Hiermit erklärt der Hersteller, dass das Gerät der Richtlinie 2014/53/EU entspricht. Der vollständige Text der EU-Konformitätserklärung ist unter der folgenden Internetadresse verfügbar: www.alphaip.de.
Ort die Temperatur und Luftfeuchtigkeit im Raum. Die gemessenen Werte werden zyklisch an den Alpha IP Access Point und die Alpha IP App übermittelt und sind im Homescreen der Al- pha IP App abgebildet. Die Montage erfolgt im mitgelieferten Wechsel- rahmen oder in bestehenden Schalterserien führender Hersteller durch...
IP System über den Access Point (HAP 21001) erfolgen. Gerät wie folgt anlernen: Ö Der Alpha IP Access Point wurde über die Alpha IP App eingerichtet (siehe Handbuch HAP 21001). 1. Die Alpha IP App auf dem Smartphone öffnen.
Alpha IP STH 61001-xx Inbetriebnahme Montage Aufgrund des Batteriebetriebs kann der Montageort flexibel gewählt werden. Die Montage kann im mitgelieferten Wechselrahmen durch Ver- schrauben oder Aufkleben der Montageplatte erfolgen. Eine Integration in eine bestehende Schalterserie ist ebenfalls möglich. 5.2.1 Mit Klebestreifen montieren Abhängig vom Untergrund kann die Montage mit den mitgelieferten...
Alpha IP STH 61001-xx Inbetriebnahme 7. Die Dübel in die Bohrungen einsetzen. 8. Die Montageplatte mittels der mitgelieferten Schrauben montieren (H, vgl. Abb. links). 9. Den Wechselrahmen auf die Montageplatte setzen. 10. Das Gerät auf die Montageplatte aufsetzen und in die Klammern einrasten.
• Das Gerät austau- schen. 7 Batterien wechseln Durch Blinkcodes am Gerät oder dem Symbol in der Alpha IP App wird eine geringe Batteriespannung signalisiert. Die Batterien durch neue ersetzen: 1. Das Gerät aus dem Rahmen und von der Montageplatte abziehen (vgl.
Tuch leicht mit lauwarmem Wasser angefeuchtet werden. Für die Reini- gung ein lösungsmittelfreies Reinigungsmittel verwenden. 9 Werkseinstellungen her- stellen Durch Herstellen der Werkseinstellungen gehen alle vorgenommenen Einstellungen verloren. 1. Das Gerät aus der Alpha IP App löschen. 9 Die Werkseinstellungen sind wiederhergestellt.
1. Sicherstellen, dass das Gerät aktiviert ist und eine Funkverbindung zum Access Point besteht. 2. Das Gerät aus der Alpha IP App löschen. 3. Das Gerät aus dem Rahmen und von der Montageplatte abziehen (vgl. „Gerät anlernen“ auf Seite 8).
Seite 15
Alpha IP STH 61001-xx Alpha IP STH 61001-XX Instruction manual 133682.1720...
Seite 16
Alpha IP STH 61001-xx Contents About these instructions ........ 16 Validity, storage and forwarding of the instructions Symbols Safety ............. 17 Intended use Safety notes Conformity Function ............19 Device overview ..........20 Technical Data Commissioning ..........21 Teach-in of the device Installation 5.2.1...
1 About these instructions Validity, storage and forwarding of the instruc- tions These instructions apply to the Alpha IP Temperature and Humidity Sensor – Interior (STH 61001-xx). These instructions include information necessary for commissioning and operating. These instructions must be read completely and thoroughly before commencing any work with the device.
• for a fixed installation in environments of residential use, • for measuring temperature and humidity in a room, • for the connection of further Alpha IP components and the commu- nication with these. Every other use, modification and conversion is expressively forbidden.
Alpha IP STH 61001-xx Safety Conformity Hereby the manufacturer declares that the device complies with Regu- lation 2014/53/EU. The complete text of the EU Conformity Declaration is available under the following URL: www.alphaip.de.
The measured values are transmitted cyclically to the Alpha IP Access Point and to the Alpha IP app and are displayed in the home screen of the Alpha IP app. Installation is performed in the supplied interchangeable frame or in existing switch series of leading manufacturers by screwing or gluing on different surfaces.
Alpha IP STH 61001-xx Device overview 4 Device overview Interchangeable frame Sensor (electronic unit) System key (teach-in key and LED) Mounting plate Technical Data Short designation of the device STH 61001-xx Supply voltage 2x 1.5 V LR03/micro/AAA Power consumption max. 20 mA Battery service life 2 years (typ.)
IP building automation system via the Access Point (HAP 21001). For this, teach-in the device as follows. Ö The Alpha IP Access Point has been set-up via the Alpha IP app (see manual HAP 21001). 1. Open the Alpha IP app on your smart phone.
Alpha IP STH 61001-xx Commissioning Installation The battery operation allows a free choice of the installation place. The device can be installed in the supplied interchangeable frame by fixing the mounting plate with screws or with adhesive tape. An integration into an existing switch series is also possible.
Alpha IP STH 61001-xx Commissioning 7. Insert the dowels into the bores. 8. Install the mounting plate with the supplied screws (H, see fig. left). 9. Install the interchangeable frame onto the mounting plate. 10. Position the device onto the mounting plate and latch it into the clips.
Alpha IP STH 61001-xx Displays 6 Displays Status displays Display Meaning Meaning Long lighting in Process confirmed Confirmation of per- green formed setting/trans- mission. 1 lighting in orange Test indication Wait until the device and 1 lighting in is ready.
• Replace the device. 7 Changing batteries Flashing codes at the device, or the symbol in the Alpha IP app, sig- nalize low battery voltage. Replacing the batteries: 1. Pull the device from the frame and the mounting plate (see „Teach- in of the device“...
Use a solvent-free cleaning agent for cleaning. 9 Resetting factory settings All settings will be lost when the factory settings are restored. 1. Delete the device from the Alpha IP. 9 The factory settings are reset.
1. Ensure that the device is active and there is a wireless connection to the Alpha IP Access Point. 2. Delete the device from the Alpha IP app. 3. Pull the device from the frame and the mounting plate (see „Teach- in of the device“...