Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
The device must only be connected with an electric installation carried out in compliance with the IEC
standards. The electric installation must be equipped with a Residual Current Device (RCD) with a maximum
fault current of 30 mA.
Before taking into operation for the first time, the installation has to be approved by an expert!
CLEANING AND MAINTENANCE
The operator has to make sure that safety-relating and machine-technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine-technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1) All screws used for installing the devices or parts of the device have to be tightly connected and must not
be corroded.
2) There must not be any deformations on housings, fixations and installation spots (ceiling, suspension,
trussing).
3) Mechanically moved parts like axles, eyes and others must not show any traces of wearing (e.g. material
abrading or damages) and must not rotate with unbalances.
4) The electric power supply cables must not show any damages, material fatigue (e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a
skilled installer and any safety problems have to be removed.
Maintenance and service operations are only to be carried out by authorized dealers.
Should you need any spare parts, please use genuine parts.
Should you have further questions, please contact your dealer.
TECHNICAL SPECIFICATIONS
Power supply:
Power consumption:
Max. load WLL (4-fold):
Max. load BGV C1 (8-fold):
Max. load BGV C1 (10-fold):
Max. load BGV C1 (12-fold):
Max. diameter of mirror ball:
Rotation-speed:
Dimensions (LxWxH):
Poids:
Please note: All information is subject to change without prior notice. 22.09.2014 ©
DANGER TO LIFE!
230 V AC, 50 Hz ~
7 W
450 kg
225 kg
180 kg
150 kg
150 cm (EUROLITE)
approx. 1 RPM
280 x 240 x 110 mm
5 kg
15/15
00086063.DOC, Version 2.2
Werbung
Inhaltsverzeichnis
