Hama Fineline Bedienungsanleitung Seite 3

G Operating instruction
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Please keep these instructions in a
safe place for future reference. If you sell the device, please
pass these operating instructions on to the new owner.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to
draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
• Aktive Stylus 'Fineline'
• 1 x A27 battery
• These operating instructions
3. Safety Notes
• The product is intended for private, non-commercial use
only.
• Protect the product from dirt, moisture and overheating,
and only use it in a dry environment.
• Do not drop the product and do not expose it to any
major shocks.
• Children are not permitted to play with the device. Children
may not clean the product or perform user maintenance
without supervision.
• Dispose of packaging material immediately according to
locally applicable regulations.
• Do not modify the product in any way. Doing so voids the
warranty.
2
Warning – Batteries
• When inserting batteries, note the correct polarity
(+ and - markings) and insert the batteries accordingly.
Failure to do so could result in the batteries leaking
or exploding.
• Do not tamper with or damage/heat/disassemble the
batteries/rechargeable batteries.
• Do not short circuit the batteries/rechargeable batteries
and keep them away from uncoated metal objects.
• Do not short-circuit batteries.
• Do not charge batteries.
• Keep batteries out of the reach of children.
• Do not allow children to change batteries without
supervision.
• Remove the batteries from products that are not being
used for an extended period (unless these are being
kept ready for an emergency).
• Immediately remove and dispose of dead batteries from
the product.
4. Product components
• Battery compartment; can be unscrewed (1)
• 'On' button with status LED (2)
• Adjustable 2.5-mm tip (3)
5. Inbetriebnahme
Inserting the battery (Pic.1)
• Use one A27 battery.
• To get started using the product or to change the battery,
open the product by removing the screw(s).
• Remove the protective foil (if present) from the A27 battery.
• Insert the A27 battery into the battery compartment. Be
sure the polarity is correct.
• Screw the device back together.