Carbon Filter - GERATEK Vigo DH116X Bedienungsanleitung

2.5 Carbon filter

WARNING! Unplug the appliance or disconnect it from the mains (use
the relevant fuse in your household fuse box).
WARNING! Use the carbon filters in recirculation mode only.
1. Remove the grease filter(s).
2. The carbon filters are intended to be installed on both sides of the motor.
3. Place the carbon filter on the motor and turn it clockwise until it is firmly
tightened ( s. fig. below).
A Motor
B Carbon filter
C Clockwise rotation = Place the carbon filter on the motor und turn the
filter clockwise until it is installed properly.
4. Repeat the procedure on the other side of the motor.
5. Install the grease filter(s).
6. If you want to uninstall the carbon filters, turn the filters anti-clockwise and
remove them.
NOTICE! If the carbon filters are installed, the suction power is reduced.
41