Install; Find Ip Address - SEH primos Bedienungsanleitung

Install

After primos has been connected, it automatically receives an IP address.
Determine the IP address and then set up the queues for your printers.

Find IP Address

primos receives an IP address via DHCP. If this is not the case, primos seeks a
ZeroConf IP address from the ZeroConf address range (169.254.0.0/16).
The primos IP address can be determined using the SEH primos App.
System requirements of the SEH primos App:
– Windows 7, Windows 8, Windows 10;
OS X 10.7.x – 10.11.x
– The installation can only be carried out by users with administrative
rights.
 primos is connected to your network (6).
1. Write down the hardware address of you primos. You can find the hard-
ware address in the type plate at the bottom of primos.
2. Download the SEH primos App for your operating system from the
SEH Computertechnik GmbH website.
Quick Installation Guide 8