InFocus SimpleShare INA-SIMRINT1 Bedienungsanleitung Seite 6

Pairing Receiver and Transmitters
1. Initial pairing
1
When paired, the IP address will appear on the Set Mode Check window.
3
For additional Transmitters, repeat above procedure.
4
- Remove the USB Dongle from laptop upon setup.
- Upon each new Transmitter paired, please check that a new
IP address is added on the Set Mode Check window.
Click on the X button at the top right corner of the Set Mode
5
Check window to exit the setup procedure.
2
Connect the Touch USB dongle to the
1
USB port of laptop or PC.
2 Press and hold the Transmit Button
while switching the power switch to ON.
Keep holding the Transmit Button
for ~10 seconds until status LED starts
3
- 6 -
2
5
4