Error
No power assist when driving
the scooter
Range too low
The battery can not be charged 1. The charger is not connected
The dispay does not work
The engine does not run when
switched on
7. Troubleshooting
Wichtige Hinweise
Troubleshooting
Not switched on
1. The battery is not fully charged
2. The tires have too little air.
3. Frequent brakes / starts /
Overload trips
4. The battery is too old or has reached the maxi-
mum charge cycles.
5. low temperature, battery
damping
2. Battery temperature is too low
3. Battery temperature is too high
1. Is not switched on
2. Adapter defective
3. Meter faulty
1. The brake is engaged / activated
2. Meter faulty
1. Check if the battery is connected correctly.
2. Check if the battery needs to be charged
1. Check if the charger is working.
2. Check the tire pressure
3. Drive properly
4. Replace the battery
5. normal perspiration
1. Check if the cable is connected
2 / 3. Wait until the temperature returns to normal
Check battery condition
2./3. Contact the customer service
1. Check the brake
2. Contact the customer service for replacement
4 9
4 9
Solution
E