Technical Specifications; Main Components - Yarden 80620 Gebrauchsanweisung

INSTRUCTION MANUAL
Introduction
To get the most out of your new garden lamp,
please read this manual and the enclosed safety
instructions before use. Please also save the
manual in case you need to refer to it at a later
date.

Technical specifications

Power source:
Battery:
Height:
Diameter:
ENGLISH
solar-charged battery
600 mAh NiMh
550 mm
135 mm

Main components

1. Solar cell panel
2. Lamp unit
3. Pipe
4. Wall brackets
A ground spike is also included (not illustrated)
Positioning
• Avoid placing the lamp in shadow, to ensure it
receives direct sunlight during the day on the
solar ell panel (1).
• Avoid exposing the lamp to artificial light after
dark. This will prevent it coming on
autmatically.
Assembly and use
Unpack all components.
Can be mounted on ground spike or wall bracket:
Mounting on ground spike:
Assemble pipe (3) and spike by pressing them
together.
Insert spike in ground (do not strike).
Mounting on wall bracket:
Mount bracket (4) where required.
Check wall can bear weight of lamp.
Assemble pipe and bracket by pressing
them together.
Carefully fix lamp unit (2) on pipe.
Allow lamp to charge in sunlight for at least 6
hours before use.
Set lamp switch to ON.
Lamp will switch on when it is dark and charge in
sunlight.
10