Hyundai 5100S Bedienungsanleitung Seite 11

Flash
In low light conditions it is best to use the built-in flash. You can also use the flash to compensate for backlight
conditions.
To set the flash:
Note: Please move the Macro/Far switch to Far mode, otherwise you will be reminded "Macro Mode"
indicating you can only use the flash function in Far shooting mode.
Press the Flash button repeatedly. Select the
automatic flash.
Press the Flash button repeatedly. The
function has been "forced on" (manual flash). If the flash is not ready, a red LED will light up beside the LCD
screen and the icon will flash repeatedly- wait until the flash is ready before taking a photo. A "low battery"
warning will appear on the LCD screen if there is insufficient battery power to operate the flash.
Press the Flash button repeatedly until
is on.
Press the Flash button repeatedly until the
Self-Timer
You can include yourself in a photo by using this feature to delay the time between your pressing the shutter
and when the photo is actually taken.
1. Press Menu button.
2. Press Right/Left button to select icon
icon shown on the LCD screen. This will activate the
icon will appear on the LCD screen. This means the flash
icon will show on the LCD indicating that the Red-Eye reduction
icon appears. This will turn off the flash function.
, the function menu as below:
10