Sun Garden YORK Anleitung Seite 2

Please read the construction instructions carefully
through before assembling the table.
Damages caused by non-observance of the
instructions are excluded from any liability and
guarantee
Tools required
❏
two Allen keys; 1 x Size 4 mm
1 x Size 5 mm
Included in delivery
The garden table is delivered in stable cardboard
packaging.
The garden table is made up of the following
components:
1 Tabletop;
1
Shape according to model: rectangular 70 x 70 cm
rectangular 90 x 90 cm
round 110 cm
4 Table legs
2
4 Foot caps
3
1 sleeve nut with Allen key; M6
4
Diameter across flats: 5 mm
9 Allen screw; M6,
5
Diameter across flats: 4 mm
Preparations for assembly
➭ Remove all components from the packaging.
➭ Check that all components have been supplied
in accordance with the list above.
➭ Place the table slab upside down on the floor.
➭ Push the foot caps into the table legs as far as they
will go.
Issue: 25.07.2006
1
2
3
4
5
Note
• Please place the table slab on a suitable
underlay such as cardboard.
to floor
4 x , foot caps
3
Subject to alterations due to technical improvements.
A
SSEMBLY INSTRUCTIONS FOR GARDEN TABLE
Assembly
1st step:
➭ Insert the sleeve nuts into the corresponding drill
holes in the centre brace (see sketch) and place
the spacer bushes on the sleeve nuts.
➭ Place both table legs together in the cutouts on
the centre brace and screw together.
Centre braces
2nd step:
➭ First loosely connect all the table legs with
the tabletop by screwing in the Allen screws.
➭ Then tighten all fixing screws carefully.
„Y " A T
ORK WITH LUMINIUM ABLE
You will need:
1 x , Allen screw M6; Size 4 mm
5
2 x , Table leg (detailed cutout with
2
recesses in centre braces)
1 x , Sleeve nut with allen key;
4
size 5 mm
Note
Overtightening the fastening screws will
damage the threaded inserts or the granite
table slab.
You will need:
the assembled subframe
8 x , Allen screws M6;
5
size 5 mm
1 x , Tabletop with threaded
1
inserts
F
RAME