Maintenance And Cleaning - Renkforce 1369187 Bedienungsanleitung

• Attach the product to the surface using screws. If necessary, use
the screws and wall plugs provided.
When drilling or tightening screws, make sure not to damage
any cables, wires or pipes located underneath the surface.

Maintenance and cleaning

• Do not use any aggressive cleaning agents, rubbing alcohol or
other chemical solutions as they can cause damage to the housing
and malfunctioning.
• Never point a water jet, for example such of high-pressure cleaning
equipment, at the product, as that could lead to short-circuit and
damage the product!
• Do not apply too much force when cleaning the product in order to
avoid scratching.
• Besides occasional cleaning, the product is maintenance-free.
• Use a clean, soft and dry cloth to clean the housing. For more
stubborn dirt, slightly moisten the cloth with a little lukewarm water.
Disposal
a) Product
Electronic devices are recyclable waste and must not be
disposed of in the household waste.
At the end of its service life, dispose of the product according
to the relevant statutory regulations.
Remove any inserted (rechargeable) batteries and dispose
of them separately from the product.
b) (Rechargeable) batteries
You as the end user are required by law (Battery Ordinance) to return
all used batteries/rechargeable batteries. Disposing of them in the
household waste is prohibited.
Contaminated (rechargeable) batteries are labelled with
this symbol to indicate that disposal in the domestic waste
is forbidden. The designations for the heavy metals involved
are: Cd = Cadmium, Hg = Mercury, Pb = Lead (name on
(rechargeable) batteries, e.g. below the trash icon on the
left).
Used (rechargeable) batteries can be returned to collection points
in your municipality, our stores or wherever (rechargeable) batteries
are sold.
You thus fulfil your statutory obligations and contribute to the
protection of the environment.
Technical data
Power supply ..........................2 batteries, type AA (not included)
Protection type .......................IP44
Operating conditions .............-10 to +60 ºC, <85 % RH
Storage conditions.................-10 to +60 ºC, <85 % RH
Dimensions (W × H × D) ........190 × 310 × 110 mm
Weight ......................................455 g
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. This publication represent the
technical status at the time of printing.
© Copyright 2015 by Conrad Electronic SE. V1_1015_02-ETS-Mkd