Cable Preparation; Maintenance; Warranty - Rainbow audio EL-T19 Einbauanleitung

Shorten tweeter cable (e.g., AIV Silverado with at least 1 mm² cross section) to the appropriate length
and strip both ends. Insert the red conduit cover (+) over the appropriately marked conductor and the
black cover (-) over the remaining conductor. Solder one end of the stripped conductor to the cable end
sleeve. Provide cable end sleeves at the other end of the cable as well as at the short connection cables
of the tweeters.
Note: Attach tweeter only over the prepared connection cables, preferably with suitable plug
contacts. Soldering of the cables directly to the tweeter is not possible. The tweeter can be
severely damaged by the soldering procedure.
In general, the loudspeaker cables should be kept as short as possible and run in such a way that they
are kept separate from the auto's electrical system, thereby preventing distortion caused from the
generator and electrical wiring. The loudspeaker cables can also be twisted together to help prevent
distortion. Rolling up excess loudspeaker cable length is not helpful, as it merely increases chances of
distortion.
The components should be cleaned at regular intervals as the conditions in motor vehicles rapidly cause
soiling and a deterioration of the material. Use a soft, moist cloth and wipe dry. Do not use any solvents
or organic detergents.
GmbH undertakes for all products a minimum 2-years warranty or the statutory warranty
rainbow audio
period for the perfect function of all parts. The warranty begins with the acquisition of the product by the
authorized dealer, is entitled only to the direct first buyer, and is non-transferable.
The warranty covers all material and manufacturing defects, however it excludes mechanical defects,
defects caused by electrical overloading and foreign interference by unauthorized persons.
Mechanical Defects
Defects resulting from damage to the components during installation, dirt or metal shavings in the open
magnetic system, and inappropriate installation for use not corresponding to the intended range of
application.
Electrical Defects
Damage resulting from electrical and thermal overloading and/or inadmissibly high power supply, and
clipped amplifiers.
Electromechanical Defects
Damage occurring from operation of the loudspeaker system with too high volumes, inappropriate
enclosure volume, for example, trunk, etc., and the corresponding damages caused such as burned
voice coils and broken lead wires, and accidents, including acts of God, or others for which
GmbH cannot be held accountable. In particular, water and fire are not subject to warranty.
rainbow audio
Normal wear and tear is not covered under warranty.

Cable Preparation

Maintenance

Warranty

18