Herunterladen Inhalt Inhalt Diese Seite drucken

Vibration Function - Hama THUNDER V5 Bedienungsanleitung

Vorschau ausblenden Andere Handbücher für THUNDER V5:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 6
5. Functions

Vibration function

The Hama Racing Wheel Thunder V5 has two internal
motors, which only function in games that also support
Force Feedback and when all supplied drivers have been
installed on your PC.
Refer to the manual of your game to find out if it supports
the vibration function.
If problems persist, check whether vibration support was
activated in the game options.
Note
In order to support vibration, the PS3 console's firmware
must be updated to version 2.0.
Mode-Funktion:
Pedals with analogue gas/brake function (PC)
To use the pedal with analogue gas and brake function on
your PC, proceed as follows:
1. Press the „START" and „SELECT" buttons at the same
time and hold them down until the red LED turns yellow.
2. Next, press the 8-way directional pad (D-pad) to the left.
Analogue mode is now activated.
3. To switch back into digital mode, repeat step 1 and
press the brake pedal after the yellow LED appears.
Rocker switches with analogue gas/brake function (PC)
To use the rocker switches with analogue gas and brake
function on your PC, proceed as follows
1. Press the „START" and „SELECT" buttons at the same
time and hold them down until the red LED turns yellow.
2. Next, press the 8-way directional pad (D-pad) to the
right. Analogue mode is now activated.
3. To switch back into digital mode, repeat step 1 and
press the brake pedal after the yellow LED appears.
RESET function PS3
Restore steering wheel factory settings on the PS3:
1. Press the „START" and „SELECT" buttons at the same
time and hold them down until the red LED turns yellow.
2. Next, press the gas pedal twice to return to the standard
configuration of the steering wheel.
Notes
1. Ensure that your game software supports game
controllers.
2. To use the vibration function, your game software must
support Force Vibration/Force Feedback.
3. If some buttons do not function in the game, check the
button settings in the Options menu. They can generally
be configured there as well. Also refer to the manual of
the game in question.
6. Positions of the function buttons and table with the
corresponding descriptions
Nr
PS3
1
Brake
2
Accelerate
3
X
4
Circle
5
R1
6
Steer L&R (X)
7
Square
8
Triangle
9
L1
10
Lower gear
11
Higher gear
12
L3
13
R3
14
L2
15
R2
16
D-PAD
17
SELECT
18
PS3 HOME
19
START
PC
Brake (Y-)
Accelerate (Y+)
Button 3
Button 2
Button 6
Steer (X)
Button 4
Button 1
Button 5
Lower gear
Higher gear
Button 11
Button 12
Button 7
Button 8
8-way controller
Button 9
No function
Button 10
5

Quicklinks ausblenden:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis