Start To Use; Energy Saving Tips - Guzzanti GZ-251 Gebrauchsanleitung

2.3 Placement
• Before using the freezer,
• Keep away from heat and

2.4 Start to use

• The freezer shall stay for half an hour before connecting power when it is
• The freezer shall run 2 to 3 hours before loading fresh or frozen foods; the

2.5 Energy saving tips

• The appliance should be located in the coolest area of the room, away from heat producing
appliances or heating ducts, and out of the direct sunlight.
• Let hot foods cool to room temperature before placing in the appliance. Overloading the
appliance forces the compressor to run longer. Foods that freeze too slowly may lose quality,
or spoil.
• Be sure to wrap foods properly, and wipe containers dry before placing them in the appliance.
This cuts down on frost build-up inside the appliance.
• Appliance storage bin should not be lined with aluminium foil, wax paper, or paper towelling.
Liners interfere with cold air circulation, making the appliance less efficient.
• Organize and label food to reduce door openings and extended searches. Remove as many
items as needed at one time, and close the door as soon as possible.
remove all packaging
materials including
bottom cushions and foam
pads and tapes inside
the freezer, tear off the
protective film on the door
and the freezer body.
avoid direct sunlight. Do
not place the freezer in
moist or watery places to
prevent rust or reduction
of insulating effect.
firstly started.
freezer shall run for more than 4 hours in summer in advance considering
that the ambient temperature is high.
• The freezer should be
placed in a well-ventilated
indoor place; the ground
shall be flat, and sturdy.
• The top space of the
freezer shall be greater
than 70 cm, and the
distances from both sides
and backside shall be more
than 20 cm to facilitate
heat dissipation.
9