Herunterladen Inhalt Inhalt
Teilen
Diese Seite drucken
  1. Anleitungen
  2. Marken
  3. Blue Sky Energy Anleitungen
  4. Solaranlage
  5. SOLAR BOOST 50
  6. Handbuch

Blue Sky Energy SOLAR BOOST 50 Handbuch

50amp 12 / 24vdc mppt pv-regler
Vorschau ausblenden
Inhaltsverzeichnis

Quicklinks

Diese Anleitung herunterladen
SOLAR BOOST™ 50
50AMP 12/24VDC MAXIMUM POWER POINT TRACKING
INSTALLATION AND OPERATION
2003167
THIS MANUAL INCLUDES IMPORTANT SAFETY INSTRUCTIONS FOR MODELS
CE MANUEL CONTIENT D'INSTRUCTIONS IMPORTANTES POUR LES MODELES
DIESES HANDBUCH ENTHÄLT WICHTIGE HINWEISE FÜR DIE MODELLE
ESTE MANUAL INCLUYE INSTRUCCIONES DE SEGURIDAD IMPORTANTES PARA
COVERED UNDER ONE OR MORE OF THE FOLLOWING US PATENTS
© Blue Sky Energy, Inc. 2011
PHOTOVOLTAIC CHARGE CONTROLLER
MANUAL
CONFORMS TO
UL STD. 1741
CERTIFIED TO
CAN/CSA STD. E335-1/2E
CONFORMS TO
EN 50081-1
EN 50082-1
EN 60335-1
SB50L, SB50DL, SB50RD25
SAVE THESE INSTRUCTIONS
SB50L, SB50DL, SB50RD25
PRIERE DE SAUVEGARDER CES INSTRUCTIONS
SB50L, SB50DL, SB50RD25
BITTE BEHALTEN SIE DIESE HINWEISE
LOS MODELOS
SB50L, SB50DL, SB50RD25
CONSERVE ESTAS INSTRUCCIONES
6,111,391 • 6,204,645
This device complies with part 15 of the
FCC rules. Operation is subject to the
following two conditions: 1) This device may
not cause harmful interference, and 2) This
device
must
accept
any
received, including interference that may
cause undesired operations.
interference
430-0015 F
Inhaltsverzeichnis
loading

Verwandte Anleitungen für Blue Sky Energy SOLAR BOOST 50

Inhaltszusammenfassung für Blue Sky Energy SOLAR BOOST 50

  • Seite 1 BITTE BEHALTEN SIE DIESE HINWEISE ESTE MANUAL INCLUYE INSTRUCCIONES DE SEGURIDAD IMPORTANTES PARA LOS MODELOS SB50L, SB50DL, SB50RD25 CONSERVE ESTAS INSTRUCCIONES COVERED UNDER ONE OR MORE OF THE FOLLOWING US PATENTS 6,111,391 • 6,204,645 © Blue Sky Energy, Inc. 2011 430-0015 F...

  • Seite 2: Inhaltsverzeichnis

    Blue Sky Energy - Solar Boost 50 TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS .................... 2 PRODUCT DESCRIPTION ......................... 6 Part Numbers and Options....................6 OPERATION ............................6 Optional Digital Display ......................7 Charge Status Indicator ......................8 Three Stage Charge Control ....................8 Bulk Charge.......................

  • Seite 3: Important Safety Instructions

    Installation and Operation Manual IMPORTANT SAFETY INSTRUCTIONS This manual contains important instructions for Models; SB50L, SB50DL, SB50RD25 SAVE THESE INSTRUCTIONS 1. Refer installation and servicing to qualified service personnel. High voltage is present inside unit. Incorrect installation or use may result in risk of electric shock or fire.
  • Seite 4 Blue Sky Energy - Solar Boost 50 IMPORTANT INSTRUCTIONS DE SECURITÉ Ce manuel contient d’instructions importantes pour les modèles SB50L, SB50DL, SB50RD25 PRIÈRE DE SAUVEGARDER CES INSTRUCTIONS Pour l’installation et la maintenance, consulter le personnel qualifié. L’unité contient des composantes de haut voltage. L’installation incorrecte pourrait entraîner des risques de choc électrique ou d’incendie.

  • Seite 5: Wichtige Sicherheitshinweise

    Installation and Operation Manual WICHTIGE SICHERHEITSHINWEISE Dieses Handbuch enthält wichtige Hinweise für die Modelle SB50L, SB50DL, SB50RD25 BITTE BEHALTEN SIE DIESE HINWEISE 1. Vertrauen Sie Installation und Reparaturen nur Fachpersonnel an. In der Einheit bildet sich eine hohe Stromspannung. Eine falsche Installation oder Benutzung kann einen elektrischen Schock oder einen Brand als Folge haben.

  • Seite 6: Instrucciones De Seguridad Importantes

    Blue Sky Energy - Solar Boost 50 INSTRUCCIONES DE SEGURIDAD IMPORTANTES Este manual de instrucciones es para modelos; SB50L, SB50DL, SB50RD25 CONSERVE ESTAS INSTRUCCIONES 1. Solamente permita la instalación y el servicio técnico a personal capacitado. Existe la presencia de alto voltaje en el interior de la unidad. El uso o la instalación incorrecta pueden resultar en descarga eléctrica o fuego.

  • Seite 7: Product Description

    A user friendly digital display is also available to monitor PV charge performance. The display may be provided in the Solar Boost 50 controller, as a remote panel, or both.

  • Seite 8: Optional Digital Display

    Blue Sky Energy - Solar Boost 50 automáticas. La carga se enciende siempre que el conjunto fotovoltaico sea capaz de producir ≈0.2 Amperes a ≈2.5V por encima de la tensión de la batería. Cuando la carga con el conjunto fotovoltaico esté...

  • Seite 9: Charge Status Indicator

    TABLE 1 THREE STAGE CHARGE CONTROL Solar Boost 50 is typically configured for a three stage charging process, Bulk, Acceptance and Float. The most highly optimized charge process is obtained by using the optional battery temperature sensor, and if battery load varies during charge, an optional external current shunt to determine full charge based on net battery charge current.

  • Seite 10: Bulk Charge

    Blue Sky Energy - Solar Boost 50 Bulk Charge During the bulk charge stage the battery is typically less than 70% charged, and the unit delivers as much charge current as possible to rapidly recharge the battery. Bulk charge occurs when; 1) Charge current during float increases above the Float Transition Current setting, or 2) Insufficient charge current is available to hold the battery at the desired acceptance or float voltage.

  • Seite 11: Float Charge

    Certain battery types or system configurations (such as grid tied systems) may require two stage charge control. Solar Boost 50 can be configured for a two stage bulk-acceptance or bulk-float charging process to accommodate these batteries or systems. Refer to the Solar Boost 50 Setup section to configure two stage charge. EQUALIZATION CAUTION: Not all batteries can be safely equalized.

  • Seite 12: Disabling Equalization

    Blue Sky Energy - Solar Boost 50 L’égalisation est activée lorsque le bouton-poussoir rouge de l’égalisation est relâché. VORSICHT: Die Angleichung ist eine kontrollierte Überbeladung der Batterie bei einer relativ hohen Stromspannung indem eine hohe Batteriegasierung erzeugt wird. Eine Handangleichungsfunktion wird besorgt, denn ein Operator soll immer den Vorgang plannen und monitorisieren.

  • Seite 13: Temperature And Output Power

    4.45 amps @ 17 volts @ 25°C, representative boost performance under a variety of operating conditions is shown in Table 2. Your current boost performance will vary due to a variety of factors. What you can be sure of is that Solar Boost 50 will deliver...

  • Seite 14: Installation

    OVER VOLTAGE / REVERSE POLARITY PROTECTION Solar Boost 50 is fully protected against reverse polarity and high voltage transients for both the PV and the battery. If the battery is connected reverse polarity, Solar Boost 50 will not operate. If the PV array is connected reverse polarity, Solar Boost 50 will not provide output current and the Solar Panel Current display will show negative current.

  • Seite 15: Electrostatic Handling Precautions

    Installation and Operation Manual CAUTION: The unit is protected against reverse battery and reverse PV polarity, but is not protected against reverse battery to the PV terminals. Damage of this type will void the limited warranty. CAUTION: L’unité est protégée contre la polarité photovoltaïque et de batterie inversée, mais non pas contre la polarité...

  • Seite 16: Maximum Pv Short Circuit Current And Nec

    Maximum power will be delivered to the grid if the Solar Boost 50 remains in it’s bulk charge mode while selling to the grid. The key to having the Solar Boost 50 stay in bulk is to have it’s charge voltage setpoint be slightly higher than the charge voltage the inverter is regulating to.

  • Seite 17: Temperature Compensation

    ACTIVADA – NiCd Float Transition Current Measurement Shunt Solar Boost 50 can use the internal current shunt measuring Output Charge Current, or an external current shunt measuring net battery current to determine full charge. When the battery is unloaded during charge or the load during charge is relatively constant, use the internal shunt.

  • Seite 18: Float Transition Current Setpoint

    The advantage an external shunt provides could be illustrated in the following manner. Suppose a battery is at a fairly high state of charge in the acceptance mode, and is drawing 5 amps of charge current which is being provided by Solar Boost 50. If a 10 amp load is then placed on the battery, Solar Boost 50 increases output current to hold the battery at the desired acceptance voltage.

  • Seite 19: Maximum Power Voltage

    Installation and Operation Manual une valeur du courant de transition de flotteur qui permette au système de passer à la phase de flotteur dans des conditions de charge légère et de chargement complet. Réglez le potentiomètre de courant de flotteur pour un voltage sur «...

  • Seite 20: Optimizing Mppt

    Note that the values above and the scaling shown on the MPPT adjust potentiometer in Figure 3 relate to a single 36 cell module. When two modules are connected in series for a 24V input system, Solar Boost 50...

  • Seite 21: Float Charge Voltage

    Acceptance and Float charge voltage setpoints are calibrated by adjusting actual battery charge voltage as measured at the Solar Boost 50’s battery terminals. Setting charge voltage therefore requires that the battery be at or near full charge so that the unit is actually controlling battery voltage.

  • Seite 22: Metallic Conduit

    Blue Sky Energy - Solar Boost 50 PRECAUCIÓN: Monte la unidad con las aletas del disipador térmico orientadas verticalmente para promover el enfriamiento por convección y no lo encierre en un espacio reducido. Si no lo monta verticalmente, la potencia de salida promedio puede ser reducida para prevenir daños debido a exceso de temperatura.

  • Seite 23: Battery And Pv Wiring

    #24−14 AWG para ser ajustados a 2.1 in-lb (0.23 Nm). Wiring requirements for Solar Boost 50 are different than conventional PV controllers. While the performance of other controllers may be affected somewhat by wiring, wiring and connections used with this unit can have a significant effect on current boost performance.

  • Seite 24: Optional External Current Shunt

    As described in the Float Transition Current Measurement Shunt section, charge control is enhanced through the use of an external current shunt. If used, the external shunt should be installed in the battery negative cable and connected to Solar Boost 50 as shown in Figure 3 so that it measures net battery current only.

  • Seite 25: Input Power Sources Other Than Pv Modules

    INPUT POWER SOURCES OTHER THAN PV MODULES The Solar Boost 50 is a high efficiency series pass “buck” type power converter and can operate with power sources other than PV. Examples of this type of charge control include hydroelectric or wind generators, or charging a 24 volt battery from a 48 volt electrical system.
  • Seite 26 Blue Sky Energy - Solar Boost 50 SYMPTOM PROBABLE CAUSE ITEMS TO EXAMINE OR CORRECT Charge status LED System in equalize mode Disable equalize by pressing the equalize pushbutton. blinks rapidly, charge voltage may be high Charge current is Battery is highly charged...

  • Seite 27: Specifications

    FIVE YEAR LIMITED WARRANTY Blue Sky Energy, Inc. (hereinafter BSE), hereby warrants to the original consumer purchaser, that the product or any part thereof shall be free from defects due to defective workmanship or materials for a period of five (5) years subject to the conditions set forth below.

Diese Anleitung auch für:

Sb50lSb50dlSb50rd25

Inhaltsverzeichnis