5
SETUP
Inserting Batteries
Fastening the Receiver and Connecting the Earphones
www.omnitronic.de
For operation, the receiver requires two 1.5 V
mignon batteries. Unfold the front cover and
insert the batteries as indicated in the battery
compartment.
The capacity of the batteries is indicated on
the display:
With new batteries, the receiver can be
operated for approx. 7 hours. If the battery
indicator starts flashing red, the batteries are
going flat and the receiver switches off
automatically within a short time.
If the receiver is not used for a longer period
(approx. 1-2 weeks), please remove the
batteries to prevent damage in case of
battery leakage. Please refer to further
explanations in chapter Safety Instructions.
Attach the receiver via the belt clip to your
belt or strap on your instrument. When using
a wireless microphone or a transmitter for a
musical instrument at the same time, do not
place the devices side by side but place them
apart in order to avoid interference. It will
sufficient to place one device on the right side
and one on the left side of your body.
Connect the supplied earphones to the 3.5
mm jack on the receiver.
For optimum fit of the earphones, delivery
includes three pairs of silicone sleeves of
different sizes. Insert the earphones for the
17