Remote Control - Magnat MR 780 Bedienungsanleitung

OPERATIONAL ELEMENTS AND CONNECTIONS - REMOTE CONTROL
9 10 11
AMP CD
1
12
/ Disconnect
1 2 3 PROGRAM
4 5 6
RANDOM
7 8 9 0
DISPLAY REPEAT
/
4
5
AUTO INFO
6
2
SOURCE TUNING VOL.
3
1 2 3
4 5 6
8
7 8 9
7
+
0 10
• Before using the remote control the supplied
batteries must be inserted into the battery
compartment located at the rear of the

remote control.

• If the batteries have run out after prolonged
use, please replace them (type AAA).
• To prevent causing damage to the remote
control please remove the batteries if the
device is not going to be used for a prolonged
period.
1 AMP
Switches the device on when it is in the standby
mode. If the LED does not illuminate, actuate
the power switch located on the rear of the
device. Conversely the device can be switched
from power operation to the standby mode.
2 SOURCE (INPUT SELECTON)
Switches between the different audio sources:
(see also FRONT PANEL, Pos. 7). The active
input is indicated in the display..
3 TUNING
FM mode:
• Brief press: Changes the receiving frequency
in 50kHz increments (FM) (manual station
search).
• Press and hold: Searches for the next station
(automatic station search).
DAB mode:
• Selects the next or previous station in the
DAB band.
4 AUTO (DAB MODE)
This function scans the DAB frequency range
(band III) for stations. These can then be
accesses via the TUNING buttons.
5 INFO
FM mode:
Retrieving RDS information (if supported by the
station).
Further details about the RDS station informa-
tion can be found in the "RDS functions of the
tuner" section.
DAB mode:
Retrieving DAB station information (if sup-
ported by the station).
Further details about the DAB station informa-
tion can be found in the "DAB functions of the
tuner" section.
USB/Bluetooth mode:
The display shows the device ID of the
paired device, the data rate and the ID3 tag
information of the current title.
Pressing this button displays the individual ID3
tag information items in the following order:
Title – performer – album – no display
Digital inputs:
The display shows the data rate of the current
title for around 5 seconds.
6 VOLUME
Increases (▲) or decreases (▼) the volume.
7 MUTE
Switches the sound on and off.
8 NUMERICAL BUTTONS
9 SKIP TRACK BACKWARDS (USB/
BLUETOOTH OPERATION)
Pressing this once starts the track currently
being played on a Bluetooth/USB source device
from the beginning. Repeatedly pressing the
button allows you to skip to previous tracks.
16
10 SKIP TRACK FORWARDS (USB/
BLUETOOTH OPERATION)
Pressing this once starts the track currently
being played on a Bluetooth/USB source device
from the beginning. Repeatedly pressing the
button allows you to skip to subsequent tracks.
11 PLAY/PAUSE (USB/BLUETOOTH
OPERATION)
Pauses the current track on a Bluetooth/USB
device or resumes playback.
12 DISCONNECT (BLUETOOTH OPERATION)
Closes an existing Bluetooth connection and
starts the pairing mode
The non-numbered buttons are reserved for
operating the Magnat MCD 750 and have no
function for the MR 780.