Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
System
1.
The System menu can be used to select settings such as Input, Wide Mode and Power LED.
2.
Press the MENU key to open the OSD.
3.
Using the
/
keys, select System from the OSD. Then navigate to the setting yo wish to adjust.
▲
▼
4.
Use the / keys to select the setting.
5.
Input: Select the source from HDMI, DP In or VGA.
6.
Auto Source: Automatically searches for available input sources.
7.
DP Format: You can select which DP format you are using. The default is set at DP1.2.
8.
Wide Mode: You can select which screen aspect you are using. The options are Full and Aspect.
9.
Hot Key Assignment: Select the function of Hot Key 1 or Hot Key 2.
10. DDC/CI: Allows the monitor settings to be set through the software on the PC.
NOTE: DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls to be sent via software.
11. HDMI Black Level: You can select the level of blackness under HDMI source. The options are Normal and Low.
12. Quick Start Mode: Enable monitor rapidly.
Product information
1.
Press the MENU key to open the OSD.
2.
Using the
/
keys, select Information to view the basic information for your monitor and current input.
▲
▼
3.
Reset All Settings: Reset all settings to the factory defaults.
Werbung
Inhaltsverzeichnis
