Troubleshooting - Hama A-210 Bedienungsanleitung

Installation
1. Connect your AV devices (DVD player, satellite receiver, etc.) to the HDMI
switch's inputs.
2. Connect your display device (monitor, LCD, etc.) to the HDMI switch's output.
3. Switch between the individual AV devices using the button on the front side
of the HDMI switch.

Troubleshooting

Problem
No signal is output on the display
device or the picture quality is very
poor:
Safety Instructions
1. Protect the device from dirt, moisture and overheating, and use only in dry spaces.
2. Do not open up the device. If the device becomes damaged, discontinue use.
Only allow specialists to repair the device.
3. Only use dry, soft cloths for cleaning.
4. Caution: As with all electrical devices, you should keep this device out of the
reach of children.
5. Keep away from direct sunlight, radiators and vibrations. Protect from dust.
Solution
• Ensure that your output device is
HDCP-compatible.
• Your HDMI cable should not exceed a
total length of 5 m.
• Ensure that all cables are correctly
connected.
• Switch all devices off and then on again.