Product Overview - TOOLCRAFT 1577232 Bedienungsanleitung

Product overview

1
2
3
1 Hook
2 LEDs
3 Ribbed handle surface
4 Magnet
5 Power on / off button
6 Battery charge indicator
7 Charging port
Charging the battery
Fully charge the rechargeable battery before first use.
• Connect the product via the charging cable to the mains adapter.
• Connect the mains adapter to a common household wall socket.
• During the charging process, the charging indicator lights up red.
• As soon as the rechargeable battery is completely charged, the charging indicator turns
green.
• Disconnect the cable from the product and the power source as soon as the rechargeable
battery is fully charged. The product is now ready for use.
The charging time is approx. 3 hours, depending on the charge status of the battery.
Power on/off
• Press the on/off button to switch the product on. The LEDs light up with full power.
• Press the on/off button again to dim the LEDs.
• Press the on/off button again to switch off the product.
Positioning
• With the hook you can hang the product on a suitable fixture. The hook can be rotated by
360°.
• Insert the product when needed in the included stand to set it up at a desired position.
• With the magnet you can fix the product to a metallic surface. Make sure that the product
does not fall.
Care and cleaning
• Never use aggressive detergents, rubbing alcohol or other chemical solutions, as these may
damage the housing or cause the product to malfunction.
• Do not immerse the product in water.
• The product does not contain any components that require maintenance. Never attempt to
open or disassemble it.
• Do not press too hard on the housing, as this can lead to scratch marks.
• Use a dry, lint-free cloth to clean the product.
Disposal
Electronic devices are recyclable waste and must not be placed in household
waste. At the end of its service life, dispose of the product according to the relevant
statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the
environment.
Technical data
a) Work lamp
Rechargeable battery ................... 3.7 V, Li-ion, 2600 mAh
Number of LEDs ........................... 12
4
LED technology ............................ SMD
Light current .................................. 400 lm (full power), 200 lm (dimmed)
5 CRI ............................................... 80
Colour temperature ....................... 6500 K
6
Light ON time ................................ 2 h (full power), 4 h (dimmed)
7
Charging time ............................... 3 h
Operating temperature ................. -10 to +40 °C
Storage temperature ..................... -20 to +50 °C
Dimensions (L x W x H) ................ 28 x 39 x 325 mm
Weight .......................................... 177 g
b) Mains adapter
Input voltage ................................. 100 – 240 V/AC, 50/60 Hz
Output voltage .............................. 5 V/DC
Output current ............................... 1 A
This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method (e.g. photocopying, microfilming, or the capture in
electronic data processing systems) requires prior written approval from the editor. Reprinting, also in part, is prohibited.
This publication represent the technical status at the time of printing.
Copyright 2018 by Conrad Electronic SE. *1577232_v2_0218_02_IPL_m_en