Cable LINK VT30CT Bedienungsanleitung Seite 13

[5] CATV/AV: for switching Video signal (SAT or VCR) and cable TV channels
[6] PASTE (TEXT ON): Adds the TV Channel from the "clipboard" to the current position in the list after first pushing up the current
channel and those above it. The TV Channel on the "clipboard" is then removed from it's old position in the list . The TV screen
shows the new channel with "ADDED" superimposed on the picture.
[7] COPY (TEXT OFF): Copies the current TV Channel Number to the internal "clipboard" so that it can be moved to another
position in the list. The screen will display "COPIED. READY TO MOVE"
[8] DISP: Displays the selected mode : Channel number or "A/V" mode depending of the selected source (integrated tuner or
other external appliance)
[9] SCAN: automatic search tuning for TV and cable TV transmitters (to start the automatic search tuning press "SCAN" twice)
[10] CH DEL (PLAY) : Delete cable TV channels. To delete a channel, select the one you want to delete, such as No. 30 and
press "CH DEL". "TV30 DELETED" will appear in the screen. Next time you page through the channels, No. 30 will no longer
appear.
[11] SET: To change the security code of your remote control. Use this function
if you have several Cable Links at home (see section 12).
7. Programming the cable tuner
The Cable Tuner is like your TV. It needs to scan and find the available channels. You program the CableLink using the infrared
remote control unit (via the VR36).
1. Switch on the television set to which the VR36 is connected and select the video input (AV) (5) .
2. Switch on the VT30CT Video Transmitter and the VR36 Video Receiver.
3. The television set will display either a blank screen if it's a fresh VT30CT , or the current channel if it's previously been set
up.
4. Channel Search: press "Scan" (9) display shows "press again to confirm" press "Scan" again within 4 seconds
5. Display shows " scanning pls wait" and a barchart to show the progress of the scan.
6. Automatic scan is conducted , approx. 6 minutes
7. Display will then show " scan complete" – "found XYZ channels", then TV will switch to the first of the found channels
8. With the channel + and the channel – (3) button you can browse the found channels
9. To delete channels, press the "CH DEL" button (10)
10. You might be able to improve the quality of a 'weak' channel by pressing the FINE TUNE + or - buttons to manually adjust
the setting. Step through to the channel using the Channel + or - keys and press Fine Tune + or- until you get the best
picture. If you want to save this setting for future use just press COPY then PASTE . The 'old' setting will be replacd in the
list by the new one .
Rearranging the Channel List
CHAN+ and CHAN- can be used to move through the Channel List. This can also be done by keying the Channel directly using the
0-9 Keys on the handset .
Whenever a channel is found who's quality is poor or is not a real video channel and needs to be removed from the list, the CHAN
DEL (PLAY) key can be used to do this. After pressing CHAN DEL the screen displays the channel number and 'DELETED' is
superimposed on the picture. The old channel is then erased from the list and the list rearranged to fill the gap. Initially the tuner still
shows the old channel, but after 4 seconds it re-tunes to the next channel up and this becomes the new Current Channel.
It's not necessary to wait the 4 seconds before pressing another key however. The unit will respond instantly to any subsequent
key press, so if you use CHAN DEL and then follow it immediately with CHAN + you need to be aware that although the screen still
shows the channel you have just deleted, internally the unit has already replaced it with the next channel in the list , so an
immediate CHAN + will appear to move up two channels from the one you had just deleted after the 4 sec. has elapsed .
You can alter the order of channels in the Channel List using the COPY (TEXT OFF) and PASTE (TEXT ON) keys.
COPY copies the Current Channel to an internal Clipboard and marks the channel on the list for deletion once the contents of the
clipboard have been pasted into the selected position. Subsequent COPY operations just put the new channel onto the clipboard,
mark it for deletion after use and 'un-mark' the previous channel.
PASTE adds the channel on the clipboard to the Channel List at the current position, pushes up the channels above and deletes
the selected channel from it's previous position on the list. It then remembers that the clipboard has already been used so that the
channel on the clipboard is only erased from the list the first time it is used.
8. Starting up the remote control – for control of TV - VCR - SAT -DVD
8.1 Introduction
The remote control will control your various appliances (TV - VCR- SAT - DVD) and the integrated CableLink (CBL). It is pre-
programmed in the factory for most brands and models. Simply enter the code for your equipment and your remote is ready to use
8.2 How to install the batteries
1. Push the tab of the battery compartment on the back site of your remote, and lift the cover.
2. Install two fresh AAA batteries, taking care to match the + and - marks in the battery compartment.
8.3 Button Descriptions:
[1] Indicator light (LED): The indicator light flashes when the remote is operating.
[2] Power: Works in the same way as your original remote
[3] TV, VCR, SAT, DVD: Used to select the device to control.
[4] SET UP: Used for entering code numbers matching your audio/video appliances
[5] Shift: To access to secondary functions of your A/V equipment
P/N 033000=12974E revision 01-12-06 CableLink 13