Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
The first step of installing a speaker system is thorough planning. Choose a suitable location for your speaker
components carefully. Follow these suggestions to ensure proper imaging and maximum performance:
1. Choose a location that offers the least amount of obstruction between the components and your ears.
2. Try to mount the speakers on the same plane. That is, they should be at the same height and directly
across from each other. Do not mount one speaker higher, lower, further forward or further back from the
opposite speaker.
3. Always check behind the chosen mounting locations to ensure that there is proper clearance for the back
of the speakers and avoid obstructions such as window tracks, wire harnesses, gas tank etc.
4. Maximum performance is achieved when the speaker is securely mounted to a door panel or rear speaker
deck. There should be no gaps between the speaker basket and the mounting surface.
WIRING DIAGRAM AND INTERCONNECTION
WOOFER INTERCONNENCTION:
• Connect the plus-cable (white marking) of the included in-line crossover with the plus-terminal of the
woofer (marked with +). Repeat this procedure with the minus-cable (no marking) and connect it with
the minus-terminal of the woofer. Detect the correct cable-pair by the two different sized terminal jacks.
TWEETER INTERCONNECTION:
• Connect the plus-cable (white marking) of the included in-line crossover with the "plus-terminal of the
tweeter (marked with +). Repeat this procedure with the minus-cable (no marking) and connect it with
the minus-terminal of the tweeter. Detect the correct cable-pair by the two similar sized terminal jacks.
AMPLIFIER INTERCONNECTION:
• Connect the plus-cable (white marking) of the included in-line crossover with the plus-speaker output
of the amplifier (e.g. + L). Repeat this procedure with the minus-cable (no marking) and connect it with
the regarding minus-speaker output of the amplifier (e.g. + L).
Repeat the above mentioned procedure for all other channels of the sound system.
WOOFER
CAUTION
Please ensure the correct polarity (+ or -) for all connections.
Never connect loudspeakers directly with the vehicle's chassis or power supply.
SPEAKER OUTPUTS OF THE AMPLIFIER
+
L
–
+
TWEETER
PLUS
MINUS
IN-LINE
X-OVER
PLUS
MINUS
PLUS
MINUS
R
–
TWEETER
MINUS
PLUS
MINUS
PLUS
MINUS
PLUS
WOOFER
Werbung
